(For me) complicated scenario: After call passing on externally - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Hello, loves forum participants.

I stand before a task and see no light solution before me. I expect new starting points and solution types, of which I did not think.

Goes around a small company, the one ISDN connection has with 3 MSN. 1x Tel, 1x fax, 1x unused. This number is not the customers for years well-known and should be under any circumstances changed. On this connection is also still another DSL connection, which serves however only for Backupzwecken, if the main Internet binding, precipitates a cable Internet offerer, which passes 2-5 times in the year idR. The ISDN connection recently changed over, here thus freshly runs a 2-Jahres-Frist for next possible notice.

Now recently still another HomeOffice is used, other place. There I furnished a VoIP connection of Sipgate, which at least raustelefonierend the main number sends, so that it looks for the calling, as if is it the company, which calls.

There is however at present no possibility of signaling an arriving discussion also on the HomeOffice and/or. to pass on a discussion accepted in the center to the HO, so that the customer does not notice at all that he lands in the HO.

Sipgate team for this task appears to me suitably, however I cannot at present take the MSN off from the direct line, because of the minimum running time. Additionally I would have still another bad feeling to set completely from VoIP. I find - from private experience - this technology am beautiful and interesting, but for the Business employment not yet correctly stably to enough.

As hardware stand at all locations a Fritz box, which also a VPN stretches. In the center a Gigaset SX353 with 4 mobile parts is direct at the NT.

It is missing to me at ideas, with as small an investments and current auxiliary costs as possible (whereby that is not impossible, better would be it now less to naturally, spend) to convert the major task that I can pass a discussion on accepted in the center to the HO. Conceivable it would be then also that it can be returned again, and/or. that it is gleichzietig everywhere signaled, but that is not real for the moment straight the most important.

Later one can still think about it whether and how further HO could be merged or mobile phones (if one regarded Sipgate team times, comes a stop such ideas). Prio is however not 1.

Perhaps are there similar problem definitions, which were already solved with the existing hardware to ideas and possibilities, perhaps already gives it?

Me about your thoughts for this would make happy.
Cordial thanks already times in advance.

thalternate

So, which would be simplest solutions:

a) To set in the center a call forwarding with nonacceptance, thus if after xx sec. none rangeht, is rerouted the call to the HO.

b) If in the center someone accepts and to the HO to pass on wants the call, also no problem with ECT/Vermitteln is in the office. The caller does not receive anything of it whether the call is only obtained “in the house” to the correct partner or after externally. Possibly. times your people ask the guidance vomSX353 to read itself…

c) If it is to ring to SIMULTANEOUS, in the center and in the HO, parallel call would not be exactly that been, which would have used you, unfortunately does not offer the Telekom. At least with the Fritz box however a parallel call could be copied, however with loss of the display for call number in the HO. Proceed otherwise evenly as under A) described.

Okay.

to A) At first I would like actually that the HO rings only if a discussion for there is, were thus in the center someone to and it wants to pass on. Because otherwise also much develops to often the problem that one would have to give the discussion to the center.

to C) It harms that so any longer does not go with the T-Com. On Fritz box ists then at present also no solution, because not always two lines are free and in the HO would be also important to see to decide who call, in order that one to-goes or not.

to b) ECT is however not functioned in the Gigaset on. If I have a testweise discussion and that wants to pass on on another connection, it is for all involved ones away. Is a function, which I if necessary. to only request would have with the T-Com?

Quotation:

Quotation of thalternate

to b) ECT is however not functioned in the Gigaset on. If I have a testweise discussion and that wants to pass on on another connection, it is for all involved ones away. Is a function, which I if necessary. to only request would have with the T-Com?

Property unfortunately also only now ergoogelt that ECT is not marketed likewise no more by the Telekom, exactly like the parallel call

. At any price do their customers want to bounce?
Sorry, but that for you a good solution would have been natural.

Was ihr machen knntet - und das funktioniert wenigstens! - would be to be ground in the Fritz box between SX353 and NTBA. The Fritz box can copy then ECT.
However then so long both channels would be occupied…

Hmm, which would not mean, if I mediate to the HO over the Fritz box, and 1 hour am then telephoned there, is the center so long by telephone attainable?

Would not be the best one of the solutions, which one wishes oneself.

One can manage as follows: The demand/switching in the HO does not become over the 2. B-channel realizes, but over a SIP number, which must be deposited in the Fritz box. Then only the B-channel would be occupied, but the connection over the 2. still attainable.
I tested evenly times at Fritz, it go!

Ui. That is a good idea. Then 1 B-channel would remain occupied, as if the coworker would be here also directly at telephoning, however a forwarding over the Fritz box to the SIP account in the HO is internally started.

The SX353 does not hang at present on the Fritz box, that must I times cables only.
I tap times, after the again wiring must I nix change over, if I want to use everything exactly the same like before. Only, if I want to use the switching of the Fritz box, I must worry about the necessary instructions and configurations, so that I could start with that cables times.

There you made it degrees: Do you have the instructions handy, which I must send then to the Fritz box, in order to hold a connection in the Fritz box and to pass her on to an SIP account?

ECT should be switched on in the SX353 then? By “R” I have then a free character, an office, which however first times the ISDN office would be. It is complete new ground for me off here.

With me those hangs Fritz between ISDN telephone and NTBA, to that extent I it also completely with the MSN of the ISDN always furnished and the ISDN telephone in the Fritz likewise furnished.

I use the SX455, should in principle with your mobile parts be similar.
I select the MSN with the first mobile phone and accept the call at the mobile part, press then on Rckfr. (link display key) and select then my HO by VoIP on thus e.g. *121#03074757677 then I present simply, in the display of the S45 stand then for discussion mediated and I can with my second mobile phone still the MSN of the S45 reach.

Oh, muck, I states straight that there some is hartverkabelt. There I must understand and look first times the wiring that I the correct cables to cut and together knots has, in order to hang the Fritz box between NTBA and the SX353.

The setting-up of the MSN in the Fritz box ran however less intuitively than I expected. I will times rather try at night at the incoming goods or, so that the line does not stand still here.

Thanks for the assistance, I it is even strained whether that is the solution, which I looked for.

Thus the there following scenario goes to me through the head. I do not know however whether that really functions:

Company:
The SX353 is attached at the NTBA. I would hang the Fritz box still additionally to the NTBA. (To grind through goes probably also). In the Fritz box I a MSN and then the internal SIP server reacted to it to furnish.

HO:
Here I would attach the telephone to the Fritz box. Owing to VPN you would have to be able to register the SIP server in the company.

So the telephone in the HO would have to behave in such a way, as a further telephone, which would be located in the company. If desired the telephone can along-ring and you see the number call. If you want to connect, one can select simply the internal MSNs.

Hope that is so understandable.

Quotation:

Quotation of George99

Edit Novize: Unreasonable connectionless filling ratio removes - see Forum rules

So, procures and verkabelt all cables.
Now I hang straight on the point on which I a discussion am present have, when pressing on the R-key an office of wars, but the *121# not to the Fritz box, but to the switching center to go seems and comes then an error message.

At least it goes telephoning, becomes the week in this direction to still further-try.

@moses: also a superidea, me would however rather be it still, if normally outgoing discussions ran not here then over the net and a principal establishment B channel, therefore tries I this idea if I should fail because of idea 1.