is the fragment broken? - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

hy@all

I have there times rehearse.:

I have a isdn connection with DSL 6mb.
I have isdn and a similar to a telephone.
Property are Monday a Fritz box 7141 before it 7050.
Are this day funzt my Tel. no more.

has now rausgefunden, if I the connection from the Fritz box to ntba cap, then the isdn Tel funzt. again (isdn Tel to ntba).
But if I connect the Fritz box again with ntba, then no Tel. funzt. .
Also the isdn Tel. which hangs to ntba to, then no more does not funzt.
has another ntba tried = already is there the same rehearse.

I have it from the 1. Telephone box and also of the 2. Telephone box tries.

What can lie???
Is the fragment broken?

mfg
hand

p.s. thx already times in advance

Here only one are broken, i.e. your keyboard. It produces only with difficulty readable sentences, no capital letters and punctuation marks. If you want here a fruitful discussion, you should change that.

It looks in such a way, as if you did not configure the new box in accordance with manual.

you are right!!! I write everything small.
but punctuation marks I can set probably (are also present), therefore please no Spam here.

mfg
handtohand

if you a “meaningful” solution to mine rehearse. to write can, then write this.
if not, then leave yours spamerei.

write for you again to:

- Fritz box 7141 is not attached to ntba = Tel. signal
- Fritz box 7050 is not attached to ntba = Tel. signal

- both Fritz boxes not attached to ntba = isdn tel. funzt to ntba
- already one replaced ntba by me (without success)
- DSL funzt over both Fritz boxes

EDIT: the Fritz boxes after manual were configured.

Hello,

it belongs to netiquette in forums the fact that one adheres to the orthography and it as possible makes the other one as easy to read and understand the contributions. In addition also the SHIFTs key, and naturally the grammar belong.
That is also here in the forum like that, and therefore that is now the last request to hold you by it and return here to the actual topic.

I remain thereby, you the boxes wrongly verkabelt or wrongly configured.

@RiverSource

I had before the Fritz box 7050 to.
I had to make only the Fritz box 7141 to.
Then I in-selected myself into the Fritz box and configured.

That rehearse. it is now only that I, if I attach the Fritz box to ntba I none tel. - signal more get.

mfg
handtohand

“Only to-make”? There however already some changes are to be made, I legend only Y-cable, MSN configuration, type of fixed net,…

That I adjusted everything in/an the Fritz box 7141.

You also changed the cables?

Does the LED at the NTBA remain shining, if you attaches the Fritz? You can with the ISDN Tel. still raustelefonieren? If no, which error indicates the telephone?

Thus the LED with ntba remains illuminated.
If the Fritz box to ntba is and I tries rauszuwhlen (similar to and. isdntelefon at the Fritz box), then briefly the telephone LED (Fritz box) shines and goes then.
I get also a busy signal.
_______________

Is isdn tel. attached to ntba and also to ntba, then I get the Fritz box also of isdn tel. a busy signal.
However if the Fritz box is distant from ntba, then I get with isdn tel. a free character.

I assume times you uses the original Y-cable of the Fritz box. Sowas as with you is actually a classical case of vein permutation at the ISDN bus.

That is talks in vain, there one against a wall. Referring to the wiring are geflissentlich ignored since #7.

The Y-cable is following-finalproves attached:

The white short is at the fragment, the short black cable must to ntba and is enough white cables must to the Fritz box.

Hello,

that looks only times correct. You changed the wiring also with each box exchange? And the MSN and fixed wetting YP configuration are correct also in both boxes?

You changed the wiring also with each box exchange?

Yes, I made. Since the Fritz box 7050 does not have a Y-cable.

____________

And the MSN and fixed wetting YP configuration are correct also in both boxes?

Yes, I also configured.

____________

Property now a fragment of the acquaintance get.
Unfortunately is rehearse. still there.
Now I do not continue to know also more.

If I attach the Fritz box ntba, then I do not have again over ntba and the Fritz box Tel. - Signal. A busy signal then always comes.
Is nevertheless also amusing, which I with ntba then also a busy signal have.

!!!! That rehearse. is solved!!!!!

Juhuuuuuu

I called straight with my Internet offerer, since the email contact had brought not much (duration of the telephone call: approximately 2min with waiting period)

Thus: In ntba (NT-split) a fragment already is with in it (I did not know) and the fragment (not in ntba) that disturbed at one time.

I should diminish then the fragment and then should it also again funzen. So the technician.

Said, done and it funzt now again.
Now only does the question arise, why the 6Jahre well and at one time no more were not?

Quotation:

Quotation of handtohand

Thus: In ntba (NT-split) a fragment already is with in it (I did not know)

Auuuua! If you would have directly said the fact that you does not use NTBA, but the NTsplit could already have helped you days ago someone.

Guude,
as indifferent Mitleser closes I the proclamation of my previous speaker smoothly on…

Quotation:

Quotation of handtohand

Now only does the question arise, why the 6Jahre well and at one time no more were not?

… tja, interesting question however

, because it folds now…

Hello,

nevertheless it thanks that you gave feedback over the cause and the Thread not stupidly die here let.