*12345* as code with Telefonkonferenz [solved] - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Hallochen

I have the following Konfig:
- 7270 with the current official L.G.
- Siemens Gigaset ISDN SX353 with Siemens mobile part
- DoppelFlat port 1&1 without Telekom

This morning I wanted to participate to a Telefonkonferenz. A choice was a 800er number. Afterwards the system requires the so-called. Meetingsnummer with “*12345*”. I did not come clean and the system said again and again: “Giving you the Meetingsnummer asks”. What can lie? ** functions to 600 (OFF) with me. Thanks in advance.

Guude, Quotation:

Quotation of soenarto

[….] “giving you the Meetingsnummer asks”. What can lie?

You have this already discovers and converted?

Yes, before “choice activated of * and #” stands the checkmark

I said already, call OFF with ** 600 funzelts….

Quotation:

Quotation of soenarto

... Call OFF with ** 600 funzelts….

The question is not, how you can transport “*” to Fritz the box, but as you the Fritz box to persuade can to send the asterisk in the telephone call. You need thus such a thing like a “escape” a character. Of my 4175 I copied the following attitudes:
keypad.jpgBut I do not know whether the 4175 generates escape.

Autom. one. I activated key PAD. From 10 attempts I came once purely: “The moderator does not have the conference yet”, “if you the moderator is de-energised, gives you please the pin” an etc.…

Then everything is correct. The problem that you need 100 attempts, until you come once purely are because of your line. The problem must you then with 1 and 1 negotiate.

You tried already once, *#to select *12345*?

Greeting,
Yielding pool of broadcasting corporations

After the answer of loeben I wrote down equal 1&1. See times…
I tried *#*12345*, brought to #12345# and other combinations, nothing; (
So slowly I find bad to live without Telekom… VoIP nevertheless not yet in such a way developed, or which you mean?

http://www.ip-phone-forum.de/showthr...highlight=dtmf

Humans stinking boot!

That is geil, it gefunzt!! Thank you very much!

Too early been pleased…
If one is with 1&1 and it places over on “other offerer”, can the VoIP number is not called and also with this number not to call.

I cannot introduce myself. More information would be good. Is the call number still registered after the change? Which error message is to be seen in the log?

After a friend announced that the number did not function… had I tested… stimmt's. I set 1&1 as an offerer and went it again. That does not have me however in peace… RESETs in 7270 left made and “other offerers” selected and it funzt. How do I know screen SHOT here the post? How do I see messages in the log?

Guude, Quotation:

Quotation of soenarto

How do I know screen SHOT here the post? How do I see messages in the log?

Informatively:
Screenshots please over the appendix function (paper clip symbol above) merge.
You can insert the event log by copy&paste. In addition you should “eckigeklammerauf=” [” Code and “eckigeklammerzu=”]” before the text which can be inserted sets.

… do not forget and at the end [/code].

Greeting,
Yielding pool of broadcasting corporations

Enclosed the screen SHOT of the attitude of the MSN number concerned. As said, adjusted to “other offerer”. Alternatively I tried Siemens “active key PADs” on that or “* and #” -> same result. The star * is not recognized with the first time. Thus I must try several marks to I the clay/tone heard. Then klappt's with the code.

In the system -> Events do not see I the call on the 0800 number however. I see the 0800 only with “calls”.