Fritz box 7270 with Gigaset 2060isdn - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Hello together,

The following problem has. Since yesterday we have a 1&1 complete connection (thus without Telekom)
Property thereupon and the TK plant tries to configure to the HomeServer (7270) gigaset 2060 to it to attach. My proceeding:
gigaset to that HAIR DRYER S0 attached, in the configuration then the equipment as ISDN telephone system added. And afterwards registered in the Gigaset the MSNs and the numbers distributes.

So far so well, now I have however the problem that I with the devices to the Gigaset are not attached external calls transact can. First a free character comes that however after 3 seconds stops and beep in changes (beep beep…. beep beep….or so

)
If one selects then nevertheless a number, oversize display stands: "" Disturbance! “

Detailed calls are passed on however correctly and that telephone functioned without problems.
the problem is similarly to that here:
http://www.ip-phone-forum.de/showthread.php?t=190845

-----
does someone have an idea that it to lie could?

the amusing is also that if I use our old Fritz box Wlan 7050 instead of the 7270 (with the same attitudes) everything marvelously functioned.

welcomely in the forum.

) you made a work RESET for A. and also afterwards Starting code furnished. make (if not please)
b.) the fragment is still attached (you can remove with “complete”)

still if the problem should be present after the remainder Konfig (old attitudes not to bring in), then please stop screen print of the rider “Telefoniegerte” (ua where one outgoing call number of the telephone system to see can) and which call number (exact - whether with or without preselection) furnished you with the plant.

yuhu

After which I had switched the fragment off and which had set Fritz box to work attitudes and with the starter code had again configured, has it finally functioned.

thanks you, for the assistance