MD 8010 and FRITZ! Box DECT

Nextiva is a cloud based VoIP phone system, hosting lots of small and medium sized businesses nationwide. the provides UNLIMITED business calling for only $19.95 a month!! Click here for the detail about this promotion!!

Hello, has 2 MD 8010 ' s which I gladly to the FRITZ! Box via DECT would operate.

My problem: If a call is received and the caller presents or the discussion answers another telephone, the DECT telephones signal further visually a detailed discussion, i.e. the number is indicated and the displays to shine.

Can someone say to me to it somewhat? Are there any solution types?

Thanks, Martin

---

Guude, Quotation:

Quotation of jetty branch Hello, has 2 MD 8010 ' s which I gladly to the FRITZ! Box via DECT would operate.

I take on you use the 7270. ?
Give us please also a few further information to the assigned firmware.
Does this error arise already since beginning on?

---

Rear one, I uses the 7240. The error arises already since beginning on, therefore has I mean hand attachments coupled again directly to the original DECT basis. Unfortunately otherwise the Akkus was within 2 hours empty. As firmware I use the 73.04.70. Before longer time I updated also times on telephone IE laboratory - without success. Do you have perhaps an idea, which I can still try?

---

Guude, Quotation:

Quotation of jetty branch [….] Do you have perhaps an idea, which I can still try?

Thanks for your information.
I think you can there only structured proceed.

Tap:

1. Delete both telephones from the FB
2. make a POR (=5 mins. all cables off)
3. arrange after it only [[ein]] Telephone at the HAIR DRYER again
4. test whether the error arises
5. wenn_dann_schleife_A: If no errors, go to 1. and announce the telephone thereafter at the DECT in. If error makes, configures, then work RESETs by hand. 3. again
6. If no errors configure to Tel. 2….etc.

---

Hello, tried your references out. Unfortunately without success. Subsequently, still the newest telephone IE laboratory version installed, which brought unfortunately also no remedy. Do you have still different ideas? Martin

---

Guude, Quotation:

Quotation of jetty branch Do you have still different ideas? Martin

unfortunately and honestly not.

You can also surely turn with the problem to AVM directly by ticket.

(Naturally this should properly described and possibly. with a link reference to the forum happen here.)

It may be that AVM can help you. Normally those react there also quite briskly.

---

AVM came to the arrogance Quotation:

Thus the FRITZ concerns no error! Box.

Obviously that possibly does not support MD 8010 the DECT standard thus correctly. I find it only somewhat unfortunate that it no interest had to insert any Workarounds. Therefore has me interested whether someone else solution knows here. Martin