Use with FB7050 as Slave Telefonie. - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Rear one,
are NEW here and some read and are not smarter unfortunately yet. Use at present 7140 as master and 7050 as Slave. Telefonie at master does not go at the Slave??!?? The Internettelefonie is registered, but I do not hear the receiving station, with calls in the mobile net hear I then ring however not the receiving station if her decrease. In a word I wars that not baked, who can help me? Does it make a difference with the attitudes, if the FB changes with the master? Additionally to me will come probably shortly. . .

Best thanks in advance
Wuerti

Cordially welcomes in the forum

In order to be able to answer your questions, you would have to tell us somewhat more about your configuration. The best would be, you puts on themselves a signature, gives it here.

Furthermore it would be importantly zuwissen, at the best one occupied by Screenshots, which are published here by appendix function in the forum, as you furnished the two boxes.

Hmm,

best thanks however which has my configuration with a signature to do??? What should everything purely into the description of configuration, IP addresses, kind of coding, speaks everything which in the FB be registered can?
Is there also the reverse possibility? Is to be called, where one can reread the correct attitudes thereby one also the telephones at the Slave to attach and use can! I look times into the boxes purely, in order to checken the attitudes.

Best thanks and greetings
Wuerti

If you add yourself a signature, it is simpler for user entering later, it needs not always for necessary information up to the beginning back to then go.

Interesting actually is everything that with the WLAN connection, the Telefonieeinstellungen, the DSL connection (complete or Resale) etc. to do has.

You know second selections all this, e.g. in the manuals, the AVM Faq, the Providerinfos, etc.

Hello,

clearly, it gives! You look here...

Morjenn, doc

the WIKI had nevertheless again times been void

Morjen fire Fritz,

don't you have favorites/bookmarks?

Nee, in Ernst, a left you already should to him an offering, or?

My favorite list is badly long, there forgets one already times which, but the Wiki goes me actually always through it, no notion, why ...........

Quotation:

Quotation of Fire Fritz

Okay, jetz I have fastened which you with signature meant. . .

It should be nevertheless also possible that at the master DHCP is activated (the master stands with the landlord

) and at the Slave deactivated and the Telefonie functions nevertheless?!? Shouldn't the box be perhaps gescheckt, whether the Telefonie folds at all, there the rauswhlen folds only I anything hears?!? Is it similar also with arriving calls it rings, but I do not hear the receiving station and at the master function the Telefonie without problems?!? Or is it only because of the fact that I correctly did not consider the contribution supplied by you with my attitudes???

Thanks

Hello,

no, as you mean go it not, because with DHCP and is not not possible then SIP over UDP (connectingless) will change the IP.

It goes only with firm IP's, but which is still more important: you must the Voip accounts at the master and to register and register leave to the Slave.

HP: reduce your quotations in the future to the necessary! Full quotation are always redundant and as per. Forum rules does not permit.

Sorry, goes into order.
VoIP accounts with both registered and are also registered.
Apparent still haven `s must be released, had however for this still nothing.

Tries far my luck.

wuerti

With the attitude of the DHCP this nothing has to do, since this attitude affects itself only network-technically. For VoIP meaning rather subordinated has other network communication folds so long.

You find attitudes for master/Slave circuit also in Wiki. Your problem is however that the first box lodges a complaint haven for VoIP for itself and does not pass on therefore to the Slave box. Therefore also one-sided communication. It can also be that the master box haven forwarding rejects a furnished with the reference that the rule collides with an internal rule.

Which you can also try are to change used VoIP haven of the Slavebox. This goes with the pseudo update of www.the-construct.com. There you could change the haven on 5061. The operation of the side is actually self-describing.

Otherwise this topic is here in the forum one again and again the emerging. A forum search to this topic should actually be also successful. For some boxes there is also a firmware with internal SIP server, to which the Slavebox could announce itself and to which externally your used SIP account or also fixed net number (with ISDN) can be assigned. Whether this is for the used master box the case, I do not know. I know only that this applies to the 70's L.G. versions to the 7170 and 7270. With such a solution all kinds of problems can be umschiffen.

Greeting telephone male

Best thanks for the pieces of advice, should be activated now DHCP or not? Habs with and without DHCP tries, but unfortunately still without success. . .

Attitudes as in the forum recommended, but at the Slave no Telefonie possible.

I must try Jetz times with the haven forwarding.

Now ' s me is however really complicated.

Property additionally evenly a Sipgate call number furnished and with this I can receive calls. Hear also receiving station.
With my Arcor IP-Telnummer this goes not, leads I these however on Sipgate over goes it!??!
I cannot telephone to Raus yet, since account is not loaded. Would like to fall back however to my Arcor.

What do I have to adjust for my Arcor number at the Slave differently than with the master?
I would know still the Stun server (stun.arcor.com) correctly? register?!? But then Telefonie does not go also!

Therefore still someone has an idea bezgl. Arcor IP call numbers???

Hello,

look times here within the Arcor range.

And please use a “changing” - Button with a EDIT, if you still which occurs, pushing is only after 24h permitted. (Forum rules)

EDIT: now you, why a signature is important, know because are it now a Arcor Voip problem…

How change and do Edit, Arcor Voip problem???

`S is drum best thanks to all and the pieces of advice.

With my Arcor numbers the STUN server of Sipgate registered. . .

And now also the Arcornummern runs can use!!!