7270 and C47H - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Hello dear specialized visitors and hello dear notion lots (thus a hello to me back….

)

I am and/or. telephone was which I to my 7270 anmleden can on the search for a DECT. For me it is important which I can from the telephone read off whether someone on my OFF from the box gequatscht. After long, or to short, read this forum I for the C47H decided, this should as my concerns eliminate…. Does not go however, my box flashes, but at the mobile part is not to be seen. Where now does my problem lie, I made somewhat wrong, which attitude is too changes????

ASSISTANCE!!!!!!!!!!

Thanks for your patient answers!!!!

Hello,

which firmware do you have drauf? Signaling folds only with the AiO laboratory Firmwares.

Boah, the hammer, which speed puts to to day? Respect

Thus I have the “current one” daruf: 54.04.59

Hello,

as said: One needs one the new laboratory Firmwares. BUT: There are many references on it that there is a new of it within the next hours, then as beta and thus as direct forerunners of the next final version. If you want to thus make yourself the work of the conversion, perhaps then wait until tomorrow, then ' s gives probably ne new version. Again HOWEVER: It can be that AVM the functionality of the beta “shrinks to profitable size” on really stable features. Thus the Siemens support could rausfliegen. Thus you should download the current laboratory caution for the sake of, as long as there are her.

ok, sounds good. I go times of it out of which I the correct on avm the side get. hats you a name or a number of that? I am said, like beginner….
I had also consider me the mt-D to rather get, which you mean?
oh, the box must I shortly resetten, since I am changed over to complete. is called which?

Hello,

http://www.avm.de/de/Service/Service...ntwicklung.php

The MT-D gets quite reasonable criticisms here in the forum. However yet hundreds of people do not have it. Thus leave perhaps still a little caution to roll.

The RESET for complete is not so tragic, folds with all current Firmwares for the 7270.

Super, found THANKS! do I have a software now to possibly secure or can I to directly downloaden? does the box with the down load does get directly an update or have I still what to make, should I the telephone again to then announce? or then does everything go? ask over ask…. I have stop shit which broken to make, that can I well….

Hello,

in the ZIP file are as far as I know three firmware files: 54.04.58, 54.04.59 and the laboratory. After you unpacked, you can do one of it over the Web surface of the box (system -> Firmware Udate) high-load.

If you have luck, all attitudes are functioning taken over. If not, then you can by hand again enter a RESET on factory settings distinguished and all data. In any case ones you should announce the DECT of telephones off and again again. Only then they will reasonably function. In addition, all this should have documented. Read simply times in the manual, in the settled info texts and in the laboratory portal with AVM.

so, then have I me times trusted…. and which I am to say, respect and THANKS for the fast assistance. It has marvelously gefuntz and my diode shines

I love this forum ..................

Hello Schmitze

Can you give briefly a Review like the C47H to the 7270 functioned and in which function range?

Best thanks!