Call without identification only for a number close? - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Hello,

gladly my main number for callers without identification would close,
but further numbers for certain people, registered in the Fritz box, release.
Goes over the Rufumleitung or otherwise somehow?
Background: Several friends do not want in principle their Inkognito with the call other, I would like the who attachment cracks ausperrren however not my friends.
As per. Attitude Fritz box I can close unfortunately only the Igognitorufe for all numbers or for none and/or. reroute on the Anrufbeanatworter.
Gives there creative people with ideas?

Greetings

Johannes

For unknown callers (more exact: Callers without call number transmission) to a MSN leave themselves both to barriers and Rufumleitungen (e.g. on the internal) furnish OFF in accordance with the attaching pictures.
Exceptions of barriers can be furnished, as in the directory of the Fritz box the appropriate call number gets a Vip status: Then barriers and bell barriers for this caller become ineffective.

Rear one, Quotation:

Quotation of johannes866

(...)
Background: Several friends do not want in principle their Inkognito with the call other, I would like the who attachment cracks ausperrren however not my friends. (...)

unknown numbers, which to your current call number (1234) you will go on the STARTING FROM to lead. E.G. “#1234 " like sz54 it described straight. All, which call unknown to your current number, land then on the STARTING FROM. Finished.

And your friends will call you in the future (as had to their fixed net tariff) on your Sipgate number, which is not located in the directory and which you now directly to Sipgate basic tariff will furnish free of charge

Thanks.
Folds with the Rufumleitung very well. Property already a Sipgatenummer.

But because of the Vipstatus: I make a mistake in reasoning now:
As I am to let individual people through ausperren or, if her all
no sender identification have.
I habs by the way tried out and in the directory the checkmark “important person” set, it brought nothing. The call is passed on on the answering set.
I ask for clearing-up, if I stand now on the hose.

Greeting

Johannes

Quotation:

Quotation of johannes866

But because of the Vipstatus: I make a mistake in reasoning now:
As I am to let individual people through ausperren or, if her all
no sender identification have?

Good objection

Apart from the fact that is all the same to ME. Who me anonymous to call wants must on the box speak and then calls I possibly. back.

If your friends you from the mobile phone call by the way hand it if it before your number a *31# program… then with to call to you (and only where it with the number is stored) the number is conveyed.

greeting

The Durchleitung of callers with VIP status functions naturally only, if the caller transfers a call number. You want acquaintance without Call number transmission a call with existing barrier and/or. Make, must Rufumleitung of unknown quantities for callers possible you to you a “secret” call number communicate, under which you without Rufumleitung and/or. Barrier is attainable (or they must speak on the STARTING FROM).

Hello

which I in such a way imagined am this with a kind pin input to be realized!

That gives the pin correctly it through-led is if not rejected and/or. rerouted!

sorry however the consideration with the pin input find I now really a little exaggerated, and/or. you might paint me from your friend list to whom I around you to call first times a pin enter mste.

The idea with the secret call number I find rather to practicable, and make also sense can with a local SIP No. are made none point with the exception of your friends.

I habs over ISDN only the main number in the Tel book stands in such a way and the internal ones apart from No. for those directly direct-inward dialing only the family and the closest friends admits is.

There we did not have up to now ever problems.

Quotation:

Quotation of sz54

Exactly that is the point, which I cannot solve. I have 3 call numbers over DSL. One is the main number, the other RufNr. are only few people well-known. I can program the software of the 7170 however only in such a way that her entwender calls on a certain RufNr. reroutes OR calls of a certain RufNr. reroutes. I would however not like however that the box reroutes only the unknown calls to the main call number, the calls to the remaining call numbers. There does someone have a solution?

Hello

pobiere once

- Calls of the call number #1234567
(you must naturally replace 1234567 with your main call number)
- Calls reroute on internal answering sets

mfg Holger

Hey Holger, thanks for the tip, functions now perfectly. Many thank you

Hello

functioned also only if I want to reroute one without number. if I however number on one my MSN not to have want go that not but only global or?

Hmm,

I do not have yet tested however could function possibly in such a way

Calls of the call number: 123456#456789

stands for 123456 for the call number, which you would like to reroute
stands for 456789 for the MSN, on which the call takes place.

Tests would have you however.

mfg Holger

exactly the same that can be done!

Hal

only during Rufumleitung or also with calls close?

Goes also for branch instead of a MSN?

Hello

Quotation:

or also with calls close?

goes

Quotation:

Goes also for branch

no functioned, do not think once is possibly because of it that one a branch several call numbers assign can.

mfg Holger

Hello

Theoretically this cannot go however practically because I means MSN with preselection without zero enter must and one can enter only 20 numbers!

With call close only detailed or also outgoing?

Would be more practical it branch-referred!

everything already stands with Bildchen in contribution #2.
The cord sample is always alike:
- behind the “#” the own MSN stands, to which the barrier/bypass (for detailed calls) is to apply
- before the “#” it remains either free (for calls without transferred MSN) or stands there a call number or a call number range, which the effectiveness range of the barrier/bypass formulated (thus the specification 017, would close/would reroute all callers, whose transferred MSN with 017 begins).
The indication # with this range of application is officially not supported by AVM.

Tschuldigung read however the problem with the 20 number does not exist nevertheless still 1) with VoIP number must one also the preselection and the number select and with make offerers consists the MSN of preselection without the zero)! But since AVM this are not over-supported with # those it not to also extend!

Hello

to return after times to the topic. There are whole ranges which one to close can e.g. Portable radio, special call numbers! How does it function? I must make its own choice barrier there for each range (0177, 0178, 0163 etc.)! If AVM the firmware would be beautiful in such a way describes which one it directly over the Benutzeroberflhe adjust can without # etc.

Already times in the Web interface under telephone - calls - to call barrier a ansatzweise call barrier tried to adjust.

This is already in the firmware present.

Hello

call barrier goes already also for individual MSN. only if I portable radio and/or. Special call number for individual MSN to close does not want goes it. or explain it to me if necessary. mt sreenshots!