Can the 7270 on DECT Repeater use? - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Rear one,

A short question: I have possibly. forwards to buy me the 7270 however a VERY MUCH has large dwelling (without dECT Repeater no chance!). Can DECT thefunction of the Fritz box co-operate simply in such a way with such Repeater? Or only with special…?

No, the 7270 co-operates at present with no Repeater. There the reports on the range of the 7270 very differently are at present without it would do and e.g. I. change over to Siemens or SwissTel…
EDIT 23.5. Since today is it also these laboratories go

AVM answered today an inquiry to me in this connection, because I have also Problemchen with the range. To the AVM rehabilitation I must say however that a 10 years old Siemens Gigaset is also not better. In my house reliably 8-9 meters go and starting from 15 meters come it then to harsh misfires, between them to cracking.

AVM does not call on SUITOR distance 25m as test range, up to then may disturbance arise, everything seems beyond that a bonus to be.

About DECT Repeater/Extender and my idea second 7270 as DECT Repeater (price would be ok, there DECT Repeater and WLAN Repaeter in one for approx. to 160€) to begin point AVM the following:

“the FRITZ! Box cannot be used as DECT Repeater and been able to be done it
no DECT Repeater to be attached on, around the range one
to increase other cord lot telephone. Whether we this function in one
Firmware updates still make available, are not certain at present. “

That sounds for me, as if only sufficient people nerves would have and then make even one which. Thus…

General question to the DECT in the 7270: How should the box be attached around an optimal radiation to reach - box standing, lying?
Rather at the soil, or under the cover attach addendum?
How do the antennas lie in the box?

Quotation:

Quotation of Vanos

… Sounds for me, as if only sufficient people nerves would have and then make even one which. Thus…

My Anfage in this connection (and the some different) stands already since this Thread here. So fast with security nothing will come there…

Quotation:

Quotation of Vanos

General question to the DECT in the 7270: How should the box be attached around an optimal radiation to reach - box standing, lying?
Rather at the soil, or under the cover attach addendum?
How do the antennas lie in the box?

That would also interest me!

In the forum times hadn't somebody written here, he had soldered an external antenna on? As are your opinions and/or. Experiences (?) in addition?

VG,
harley

Rear one,

… if you angeKLEBTE YAGI mean?

That is interesting!

No, I did not mean actually. There was someone, which the housing screwed on and then the antennas replaced or extended (or so similarly).

A question however to this model (YAGI/JAGI?): Is it actually sufficient to stick those on the housing without direct contact? Thus only a kind radio wave aligner?

VG,
harley

Supplement: Hab' the original contribution found: http://www.ip-phone-forum.de/showpos...9&postcount=12 Times contact will take up, as history went out. Nevertheless also the adhesive variant is quite interesting, only possibly not woman compatible.

Report was from me, is called naturally Yagi (was Japanese), is my error.
Clearly that, that cannot be done is magic, then also different antennas are built.
Radio waves are transferred even in tubes.

Here with a metrology record

There you find like you a Bi-Quad for DECT also build.

but caution that consider here:DECT

Aha! Thank you for these information. Over the waveguide antenna I read an article in c't. It did not think that also in other form so well folds! With radio relay link had connected firmly.

I will lead myself the sources on occasion times to mind and something will tinker.

Nevertheless naturally experiences from Bastelorgien already accomplished would be interesting.

Already times thank you at Stal more ker!

VG,
harley

Haha, which nerves has apparent nevertheless gefruchtet:

http://www.avm.de/de/Service/Service..._telefonie.php

DECT Repeater supports the 7270 in the today's laboratory version

... and already directly in the local thread over missing co-operation reported….

nevertheless better walked into the correct direction!

Hello,

look times here...

I brought my new Gigaset Repeater (the completely new, with the two LEDs) to running, without problems. Completely simply in principle:

1. Repeater announce ready make according to Gigaset guidance
2. Fritz box in approx. 1 m distance platzieren (too is also not close badly, away continues to go)
3. approx. 10 seconds the DECT key at the Fritz box press
4. Repeater: Power supply plug purely (approx. 3 seconds) - raus - purely. The LEDs flash briefly completely fast. “Cord lot telephone get, presses a taking off, key 2, key *, and then a presenting”. That was already everything, (does not function however probably with each telephone) Habs with that Siemens S2 tried, went not. But with that Siemens S1 hats then folded.
with the new Repeatern of Gigaset no more number must be assigned over the hand set, happens automatically against the AVM guidance.
5. Repeater set up, where it is
6. Hand set switch off and in approx. 1 m distance from the Repeater restart. If the LEDs at the Repeater flash briefly, it folded.

In the case of telephoning then the right LED should flash at the Repeater. Otherwise, no connection to the Repeater exists separates to the basis, then step 6 repeats.

I have a periodic beep to clay/tone in my cordless telephones within the range Siemens of the Gigaset Repeater. How can one “switch “this off?

These beep to clay/tone is to “plumb” the Repeater radio range meant.
Around it again to loose-will you pull please the power supply plug of the Gigaset Repeater from the convenience outlet.
After 1 to 5 seconds again put in and directly again pull out.
Put again then.
If the left illuminated readout at the equipment flashes slowly, switch off again.
Again switch on, with which the control clay/tone activates and/or. one deactivates.