FB7170 - OFF with bell barrier at the ISDN equipment - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Hello,

Fritz has a box 7170 with the firmware 29.04.70 and uses there altogether 3 call numbers. Since I use the connection also in business would like I on a call number of 8-18 o'clock on workdays to be normally attainable, during which remaining time is an answering set to run, which refers to the office hours. Now it tried already once in such a way I:

- Bell barrier with hair dryer 3 and hair dryer S0 activates
- Answering sets put on - all calls accept, announcement delay 60 seconds.
- Rufumleitung at telephone hair dryer 3 with bell barrier on internal OFF put on

Unfortunately that does not function. The bell barrier probably functions, however the answering set does not go ran.

To further info.: At hair dryer 3 I do not have a telephone angeschlosssen. Property only therefore the hair dryer 3 the same call number and bell barrier as the S0 assigned, since one cannot select the ISDN telephone in the Rufumleitung. As ISDN I have telephone a Tiptel 195. Is that perhaps the problem? How can I use the desired OFF nevertheless? Does someone have an idea?

Thanks

That cannot function also, because already stands in the second set of the FBF on-line assistance to the menu option bell barrier: Quotation:

In these periods telephones do not ring and Answering sets and fax devices are not actively.

If you the STARTING FROM anyway with a delay of 60sec. it adjusted why then (specially) still another bell barrier? The telephone does not know 60sec with absence. ring, until the STARTING FROM to-goes?
If business and dwelling are identical and disturb thus ringing, you know a Rufumleitung after the office hours <immediately> on a STARTING FROM with acceptance <immediately> activate or by simple depressing the key the bell clay/tone at the telephone mutely switch.