article.voiper.org

Custom Search
VoIPer Article>>>VoIP Hardware>>FB 7170 as Repeater use

Custom Search

FB 7170 as Repeater use


2010-12-09
 
Nextiva is a cloud based VoIP phone system, hosting lots of small and medium sized businesses nationwide. the provides UNLIMITED business calling for only $19.95 a month!! Click here for the detail about this promotion!!

Hello,

I would like to use my FB 7170 as Repeater around these by LAN with my PC to connect.

A FB 7141 is to hold as modem and DHCP server. D. h. over this FB the Internetverbidung developed to this FB to be supposed then 2 Notebooks by WLAN in-select themselves around I-Net etc. to be able to use.

The FB 7170 is to hold as Repater. This is to be connected by WLAN with the 7141. Those I-net connection is there through sharpens to become, so that the PC's connects itself with the FB 7170 by LAN both the network and I-Net can use.


Somehow those cannot connect the two FB.
Do I have still which particularly to consider?
times the guidances of both boxes read?
Hello,

already so long with it and this here or that here never found?
Hello,

Now I have after this guidance

http://www.ip-phone-forum.de/showthread.php?t=102853

my Fritz boxes adjusted. But I wars the WLAN connection to each other not. By cables I receive DSL from FB 7141 to the 7170. And it funz. everything. However the FB would like to connect by Wlan. Which me Mach is in little stutzig this sentence in the guidance:

Variant 1:
Attitudes > Internet > Entrance data > Internet entrance over LAN 1 > Mode of operation >
Internet connection in the network share (IP client)

For me that means that one must connect the Fritz boxes by cables, so that that I-net DSL or signal to the FB 7170 is continued to hand.

Or do I see that wrong? On the other side, one configures under the point WDS Repeater the WLan connection to the basis station.

Greeting
Martin
first box as WDS basis with fixer IP configure, coding and MAC address of the Repeaters enter.

second box as WDS Repeater, Internet over LAN 1, fixed IP2, DHCP out, to coding and Mac address of the basis enter

then it should run.
Rear one,

it folds everything. Only something must wait to all data which I adjusted was taken over.

Thank you for the Tipps
article.voiper.org
   Copyright@2010   Sitemap