Fritz box and T-Eumex-Doorline 210 (Telekom)

Nextiva is a cloud based VoIP phone system, hosting lots of small and medium sized businesses nationwide. the provides UNLIMITED business calling for only $19.95 a month!! Click here for the detail about this promotion!!

Hello,
here my first contribution. After reading many contributions I do not get ahead unfortunately.

I had so far beside a Fritz box SL WLAN and a telephone system sine 45 ISDN (update on T-sine 721X) the Doorline 210 (inclusive Monitoring unit M06) in enterprise. In addition one places 210 at the telephone system under “door substation furnishes” the “Trtyp2 (DTMF)” for the Doorline. Super simply and functioned perfectly.

Now I would like however e.g. a Fritz box 7050 (or also 7170 or 7270) operate (for Internet and Festnetztelefonie) and naturally the sine telephone system out of operation take, since I do not need it then any longer. The Doorline 210 functions allegedly at all TK-plants with free a/b haven.

Now the similar cord telephone is also easily furnished and functions. However the Doorline 210 cannot be operated correctly.

I made the following attitudes:
Fritz box:
- Doorline hangs on hair dryer 1, cord telephone on hair dryer 2
- apart from the fixed net call number also the fictitious number 111111 furnished
- Telephone at hair dryer 2 acts outgoing and reacts in detail only with the fixed net call number
- Doorline in and outgoing with the fictitious number (other attitudes have also no other effect)

Doorline (software 1,22):
- Bell keys: Bell 1 rings to 2 (only 2 does not function) at call number **
- Parameters: Own call number ** 1

This configuration functions now as follows:
- Connection can be called by external (telephone does not ring, to substation)
- one can telephone going off normally (after pressures of the 0)
- one can call the Doorline with R and 1 from the telephone and hears the noises outside
- Substation tutet then however after presenting is enough after
- when pressing the ringing branch the telephone rings, after taking off gives it however only short double beep tones in the telephone receiver. Pressing #9 does not open also the strike-stubborn, it gives there only a short crack noise.

One cannot speak thus with the visitor at the entry door or open the entry door.

Which wrong I made and/or. how do I have to adjust the whole correctly?
Different changes brought so far nothing.

Would be mad, if someone could help me here.

Many greetings

---

The same problem has. After setting-up of FON1 at FB the Doorline tries to in-select themselves/furnish in vain into the FB (Doorline lamp flashes red…. infinitely…)
I assume that because of the missing possibility of the FON1-2 of connections is, the “spontaneous office getting” abzustellen= Vorrausetzung of Doorline (
See Bed.Anleitung Doorline page 20)
I operate probably further the Doorline at my telephone system.
Property there however the disturbing phenomenon:
Doorline rings -> DECT1 ** 310 rings:
- at the same time it tutet “on the road” (was not before),
- without with #0 to terminate, gives it is if only taken off “on the road” approx. 20 seconds a loud Besetztgetute

Perhaps someone has an idea for both problems.

---

I became the sine plant as Unteranlage to the Fritz! Box operate.

Power at few the stress and funzt.