[SETTLED] L.G. 29.04.70 haven 5060 shift

Nextiva is a cloud based VoIP phone system, hosting lots of small and medium sized businesses nationwide. the provides UNLIMITED business calling for only $19.95 a month!! Click here for the detail about this promotion!!

Hello municipality,

after 2 years FBF Abstinenz I fetched 7170 back (VPN), the leidige topic of times at that time come again to carrying, the obligation allocation haven 5060.

I have a Asterisken (like many different) behind the FBF - this is not the most productive if one it the haven 5060 takes - therefore I the haven 5060 in the FBF would much rather shift.

That could be done edit at that time over a telnet entrance (e.g. over pseudo image) and that the ar7.cfg as well as voip.cfg.

Now the whole some time is - so that bringing the pseudo image in already leaves a “disturbed” FBF, box flashes ago around the bet and likes the whole not, Recovery helped - the renewed bring in brought me the same.

Long letter, no sense -

How bring do I mean FBF fastest and permanently to it the haven to 5060 for forwarding to release and from communication this haven keep out?

That is hundred a question times posed in this forum, in former times I it along-answered, however - like said it some time passed.

LG Stefan

---

Hello Stefan,

you cannot furnish a haven forwarding (AVM jargon release) of externally 5062 for the Asterisk after internally 5060. Then would have to be changed in * the nothing. If it is to be addressed from the outside, one can regulate over SRV entries.

jo

---

Rear Rollo,

the whole goes already, however plentifully participants announce themselves, i.e. at my Asterisk. these must be able to develop the connection “as normally over 5060”, up-to-date can I the whole here test - the L.G. has as you guessed/advised furnished, everything which from me is registered okay and functioned, everything must announce which at me is missing, and/or. does not find me.

EDIT: with the “host” entry on the IP the one which can be announced I can see now mine opposite, will however not function it in this way not stably…

Is there a Workaround there? I would leave the FBF also gladly in such a way like it am.

LG Stefan

---

Up-to-date only the detour occurs to me over DNS SRV record. In addition you must have access to the entries for a Domain and from there on the DynDNS name: Haven of your Asterisks refer.

Approximately so:

_sip. _udp.meinedomain.de IN SRV 10 10 5060 myhost.dyndns.org

The external clients must address then meinedomain.de and SRV Lookup must be activated.

jo

---

Thus in the 59er or 67er with voip.cfg still, I went there also times had made, into the 70's ichs had not tested, should however still go think I.

Telnet you know still, must only remember that you vi instead of nvi used. Thus nvi /var/flash/voip.cfg. Before better voipd killen, pid get you over HP raus. 5060 in voip.cfg changes, ESC presses: wq and Enter. Voipd start manually or box again start, wars.

---

Hey Nimrod, Hey Rollo,

I have the whole simply over that FBEditor tried, it was amazingly simple

The FBF listens now on 5070 and releases 5060 without fummeln, marvelously.

Thanks for your advice & act!

So, now off in the bed

LG Stefan