Siemens Homestation at Fritz box, Rufumleitung

Nextiva is a cloud based VoIP phone system, hosting lots of small and medium sized businesses nationwide. the provides UNLIMITED business calling for only $19.95 a month!! Click here for the detail about this promotion!!

Hello together;

I have a Siemens Homestation at the fixed mains connection 7170
attached.

The cable connects the fixed corroding connection of the Fritz box with the telephone connection
the Homestation.

In addition I furnished a Rufumleitung in the Fritz box:

Arriving calls at my VOIP fixed mains connection (furnished in the Fritz box), are passed on over the Homestation to my mobile phone.



Problem: If calls are passed on, I see the number of the Handies, which put those of the actual caller into the Homestation and not on my mobile phone in each case.
How would one have the Fritz box, which Homestation configure, so that on my Handie the number of the original caller appears?


thank you in the Vorraus.


Mark

---

Servus,

that cannot be done which you wants.

---

In order to unpack times this old Thread:

Would the following constellation function?

Homestation -> at the office of a FB 7170 (gefritzter W701V)
CO2 DSL (i.e. everything/outgoing discussions over VoIP, no similar office attached)

I would like to pass detailed GSM on of discussions of the Homestation over the Fritz box function (e.g. to a CO2 mobile phone, which is free of charge attainable over CO2 DSL).
Can the Fritz box the Homestation “does recognize” by the similar entrance as “office” and process these in the internal selecting rules?
Outgoing discussions are not to run over the Homestation, it go only around a detailed number, which is passed on free of charge durably to a CO2 mobile phone number. Here possibly even is the call number of the detailed call indicated over the Homestation?

---

That is problem-free possible. You have the search words to the input in the Suchmaske of the forum already. I dare to forecast times that you get a great many helpful hits listed. There everything is hair-small avowed and one needs it not as x-to ten here the mark to do. By the way, also choice rules are possible.

Greeting telephone male

---

If like that were, I would have asked in the appropriate Thread. Since however all Threads read so far is concerned mainly with the reverse direction (thus over GSM rausrufen) and the other direction (in particular in connection with an immediate forwarding over a VoIP connection) so far was not treated, I dared in an existing! To ask Thread.
It did not concern also to explain everything hair-small but “, is possible” or “no, functioned not” is enough perfectly…

---

If you “, is possible” is enough, OK ONE.

With the offerer preselections the offerer “00000000000” (10 times 0) furnish. Subsequently, furnish the choice rules for Handyvorwahlen with the offerer “0000000000”. Program afterwards appropriate Rufumleitung.

That is actually functioning programming for the simultaneous connection of similar (GSM gateway) and ISDN connection. In addition, it should function for your application. BTW: Found with SuFu with the search words “GSM” and “gateway”.

Greeting telephone male