[solved] internal call number at WLAN equipment assign 7270 - not erasable o. capable for editing - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Hello everything,

after I endeavored the search unsuccessfully here my small “problem”:

I accomplished and can today the firmware update on the current approved firmware now for the first time definitely “prove” that I have a furnished Telefoniegert, which I do not use however.

As it was added:
When I mean Fritz box received, I possessed still no DECT terminal. At that time I furnished my NOKIA N95 8 GB as WLAN VOIP equipment.
Meanwhile I furnished a Swissvoice 567/577 as terminal. Already during the mechanism of this terminal to me was noticeable that there is still another further terminal, which I however from no menu to call or could configure - it concerned the Nokia, which has however its own SIP configuration in the telephone and not over the Fritz box was furnished. Telephone functioned perfectly thereby.

After the current L.G. update now the list of the internal telephone numbers was added, where evenly this Nokia the internal number is specified ** 611 occupied and as port “WLAN”. This announcement was so far in more keier official L.G. present.

My Swissvoice has I after the guidance of prontoman furnished around also the TAPI functions from Outlook to use (see Guidance)

I attached also Screenshots. It is not necessarily disturbing, but the internal number ** 611 is not occupied and I can it anywhere release, since this “WLAN” attached equipment within no other range is indicated - as I get raus without that I mean Fritz box 7270 on factory settings set must?

Greeting Complicated

Hello Complicated,

could you select the number times please with a telephone of “DECT ISDN” ** 611? Does your Nokia N95 8 GB then really ring? It could be that you times a Fritz! Mini announced/had?

I ask, because I connected a Nokia E51 by WLAN with the box. If I call however the list of the internal numbers, Nokia does not appear, but my mini of the simulator routine, which is connected by WLAN.

Rear Bibie,

the internal ** 611 is occupied from every other telephone. And Nokia does not react to the call. To find that me to honestly said also surprise, there I surprised was at all a WLAN attached equipment in the internal numbers - genuinly cool would be if the WLAN of devices would be internally in this way accessible. a Fritz! I had never attached mini - excluding the devices mentioned (see signature)

A way could already give me to be sufficient the internal ** 611 again freely.

Quotation:

genuinly cool would be if the WLAN of devices would be internally in this way accessible

Yes, that would be not bad, goes however not yet.

Look nevertheless times please under system > Network, rider of “devices and users” whether also the Fritz1 is specified there. You can do it then right with [X] delete.

Hmmm was a good beginning… on the idea my Nokia from the network to delete I was not yet come… now it brought nevertheless nothing. Now my Nokia deleted, but remains the internal number ** to 611 assigning. The IP freely given of the DHCP server. more.aber otherwise can be recognized no effect.

But by your suggestion I came on the idea times to look whether one at all the internal numbers assign can… again e.g. simple because new equipment in addition. .das would be also the way did not come here something to edit… nevertheless unfortunately could I anything find. Apparent times the sequence of the internal numbers cannot be changed… strangely actually.

At least I could find still here neither in the manual nor on the AVM side in the forum a contribution to that the internal numbers of the 7270 to assign again could.

edit: by the way something similar with a second answering set happened to me - I could remove that only now after the L.G. update finally again. Anywhere a menu option was not before to find where I him have deleted could. In the menu for the ABs (Telefoniegerte) is not it simply raus gone to that to delete, and persistent in it remained.

Quotation:

Quotation of Complicated

... Apparent times the sequence of the internal numbers cannot be changed…

, Those tunes order of the input those number thus can certainly the numbers by deletion and re-entry indirectly be assigned.

And the equipment with ** the 611 you cannot delete under system > Network, rider of “devices and users”? Hmmm, that is amusing. I did not mean that you delete Nokia, but the equipment with ** the 611.

I assume that firmly, which your Nokia is not assigned ** the 611.

Look nevertheless times please under WLAN > It limits monitor, “WLAN entrance (MAC ADDRESS filters)” whether there “no new WLAN Netzwerkgerte permits” is marked, if not, mark it times please and confirm it afterwards with “taking over”. I think, thus can no equipment announce itself, if you do not permit it. Nich that a stranger with you latched itself there?

Edit

Quotation:

... by the way something similar with a second answering set is passed to me…

Hmmm, then uses nevertheless the opportunity of the new L.G., and puts your box back to factory settings, announces it with the starting code at 1&1 and makes all further attitudes please by hand. Thus you receive a clean configuration without surprises and hidden errors. If then everything is furnished, you could put on still fixed a safety device, which you could bring in then if need be again.

Yes and after I tried now mine ** 610 equipment to delete and again I can to announce also confirm that it announces itself at the first free internal connection… ** the 611 equipment remains occupied by the WLAN.
Hmm I will delete all devices probably tomorrow and uses furnish again and look whether that somewhat… Thanks you times for the assistance to late hour.

Greeting Complicated

edit: @Bibie however exactly I wanted to avoid that - however you have quite it with security the best will be, if it cannot be solved tomorrow.
Nokia was the only equipment, which I had used in the form over WLAN as telephone - therefore I assumed it was this. It was also the only telephone in the network was announced and per a IP had gotten.

There is no equipment that listed is with the internal number ** 611 - that is exactly which me had in such a way surprised. See Screenshots in my first post office. That a stranger latched itself excludes I times, since all safety features are active with me and in addition also at no time a further WLAN was visible net (also no occupied channel in the range of the Fritz box) - also over Bluetooth no transmitters/receiver are seek outable which I not know.

Thus successively everything now tried:
- All DECT telephones removes - still the entry.
- All Telefoniegerte removes inclusive OFF still the entry
- RESETs of the box - still the entry
- Neglected to factory settings - the entry was raus.

Now I could occupy also the internal number ** 611 again with my DECT telephone. Apropos - now also directly with the new AVM TAPI to the Outlook selection configure

Fortunately the new installation went not so long

Thus thus is the problem actually solved - nevertheless:
How don't I come nevertheless at all to it telephone at the box to announce with the port “WLAN” that am intended or that a possible feature will become into future Firmwares?
Thus a WLAN (e.g. to use my Nokia N95 8GB) capable telephone over the Fritz box simply as telephone? That would be now really ingenious from AVM

Thanks for the tried assistance Bibie

Hello Complicated,

mean congratulations have you!

You could make yourself now still equal a safety device, so that you have a tidy configuration for all cases, which you could bring in then again, wenn's times again wedge.

If you liked to announce WLAN equipment, you could under WLAN > Monitor > “new WLAN devices permit” select or on “new WLAN power supply unit” click, if “no new WLAN power supply units permit” are selected.

A mobile phone as WLAN telephone in the FB to configure (with internal number), is not possible unfortunately (still).

Set nevertheless please still another joyful [solved] before the heading in yours first Post office with “changing” > “Extends”

Quotation:

A mobile phone as WLAN telephone in the FB to configure (with internal number), is not possible unfortunately (still).

There one sees it again times

Now it is nevertheless feasiblly with the current firmware and my N95 is actually as internal equipment by WLAN connected: http://www.ip-phone-forum.de/showthread.php?t=182718

Simply a hidden configuration was already for the later firmware present was probably

Hello Complicated,
Quotation:

Now it is nevertheless feasible

beautifully that it folds.