Custom Search
VoIP General
VoIP News
VoIP Provider
VoIP Hardware
VoIP Software
VoIP Technology
Havn't found what you want?? TRY GOOGLE SEARCH:
VoIP News
VoIP Provider
VoIP Hardware
VoIP Software
VoIP Technology
Havn't found what you want?? TRY GOOGLE SEARCH:
Custom Search
Box behind box: only RN 1 and 2 registers2010-09-04 | |||||||
|
Nextiva is a cloud based VoIP phone system, hosting lots of small and medium sized businesses nationwide. the provides UNLIMITED business calling for only $19.95 a month!! Click here for the detail about this promotion!!
So far I had “completely R” with approx. 11 MBit/s, since yesterday “complete” with approx. 17 MBit/s.
Box 1: FBF 5140 (DSL rout) Box 2: FBF 5050/FBF 5140 (DSL over LAN 1) in each case with current L.G. So far that functioned well. Now I do not get no more internet RN with the 5050 registered. Is the 5050 at all “complete” - able? Then I penetrate-hung further 5140 than box 2 instead of the 5050. With that only the first two RN (from my list of 11) can be registered, no different. If I delete RN 1 and 2, no RN is registered. In the events stands to each not registered RN: “Receiving station does not answer. Exceeding the time. “ In the CC and in box 1 all RN is registered. Are the not registered numbers 1&1 numbers, postage ores Telekom numbers or VOIP numbers of other offerers? There is only 1&1-RN, partly of T-com carried forward (Portierung with well one day delay i.O.), partly again provided. Leave themselves the same numbers, itself in the 2. Box to announce do not leave, in which announce first box? Yes. The RN of the 1. and 2. Box are identical. I use 2 boxes, in order to administer 4 to 5 telephones in a household. What happens, if you in the first box with Internettelefonie the hook with the two numbers rausnimmst, so that they are not active? Are they then after a while in the other box registered? RN 1 and RN 2 are registered on both boxes and function perfectly. I deactivated times the latter 3 RN in box 1 - without in box 2 something changed. Posting 2: Now I changed the PW of the last RN in the control center and afterwards in the boxes. Nothing new - box 1 did not register the RN immediately, box 2. Hello, which error message spits the 2. Box in the event log out? s. 1. Contribution: In the events stands to each not registered RN: “Receiving station does not answer. Exceeding the time. “ Something was noticeable to me still: After restart of box 2 (possibly. also after configuration or network separation) an outgoing discussion must be led in each case by both telephones. Otherwise it comes with detailed discussions to the mute and deaf circuit one the participant (i.e. one does not hear anything; the other one itself). Hello, One sees Sowas more frequently. Place times all 5 VoIP accounts over on “other offerer” and examine the server attitudes. I furnished registered VOIP RN to 11 with 1&1, of it 10 on box 2. The attitudes of RN 3-10 among “offerers… others” are identical to those from RN 1 and RN 2. With proxy nothing stands in it. Should “sip.1und1.de” stand here? Hello, no, Proxy can remain empty. But STUN should be correctly registered. With Registrar and STUN in each case “1und1.de” stands in it. That has times supplemental around a placed in front “sip.” and/or. “stun.” - without effect. The effects become more varied. The condition correct ready to receive shank stops obviously only few minutes after an outgoing discussion. With acceptance of a detailed discussion one hears only noise and with the calling sounds the far call clay/tone. If the calling presents then, appears occupied with the caller. In the events stands to it: “Internettelefonie with xyz over 1und1-6 (or: 3 instead of the 6) .sip.mgc.voip.telefonica.de: 5060 was not successful. A cause: Busy here (486) “ perhaps I would see the problem with also the haven 5060 indicated in the error message. To LOD you times the attitudes with FBEditor of the 2ten box, place another haven (e.g. 5061) into voip.cfg and LOD the attitudes. And give then in the 1sten box the haven for UDP (is enough believe I) for the IP of the 2ten to Fritz box freely From network attitudes I have little notion. Therefore here times the connecting attitudes of box 2. The standard gateway is identical to the IP address stopped at box 1. OK ONE, took care of itself. Habs straight read. Hello, 192.168.178.4 is really your first box? Very strange IP. And how you come on the idea to register to 192.168.180.1 /2 as DNS servers? Why calculated must the people, which state from itself, of network attitudes actually have little notion, from which recommended standard attitudes deviates and with it on the one hand an unnecessary complexity into the system and to others also still the assistance brings makes significantly more difficult? Place as the first time the name servers also on 192.168.178.4 (if that is real gateway). For the problem of the non--accessibility read here the chapter Special case VoIP Telefonie: Operated a box as WDS Client or in the enterprise “Internet over LAN”: Howto: My telephone does not ring with arriving calls? People as I do not make that usually for the aids the Possen, but evenly because they have few or no notion. Quotation:
Quotation:
So far with “completely R” everything functioned. Where do I find the “recommended standard attitudes”? What are the name servers? What is that gateway? Hello, Quotation:
Quotation:
Quotation:
Quotation:
For first I will probably get the ISDN TKA to the cellar - and box Nr.2 there will banish. My better half becomes gradual uncomfortably, because it no more cannot to be teflonieren as used. Search nevertheless once again. I had therefore had I already stress do not have the women for Fritz understanding greeting ichego1 |
