FB 7170 connect with 3x Linksys, please around assistance - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Hello together, I is again here and would like a friendly hello to all members here loose will. First of all I looked for and read here much, but not really did not find for my project, which costs me still the last hair, an understandable solution. I added myself the following devices:

Fritz box 7170 WLan/phone
2x Linksys WRT54G
1x Linksys WAP54G

From this devices I would like to provide the following configuration:

The Fritz box is basis station distributed at the Unitymediamodem, also all telephones in the house and such a thing. To these some WRT54g is to be attached to the house is in front screwed by LAN. At this my children are to be able themselves to then announce by WLAN with your laptops. Furthermore is approx. 50m a far so-called holiday house of which the second WRT 54G gotten is. This distributed then the wetting work in the holiday house and is connected by WLAN at the first WRT54G. The last Linksys, WAP54G is austrahlt again by LAN attached to the Fritz box behind the house the whole range and the laptops there by WLAN to likewise announce to be supposed itself.

Is this project realizable? If it would be to be conveyed possible to me briefly the configurations of the 3 Linksys? I thank you in vorraus and many greetings from Hessen,

adi_68

in front to the house screwed sounds adventurous…. because none outdoor-turns out….
but theoretically those should be konfig no problem.
is for a long time ago which I me with these devices busy however I attempt!

CABLEMODEM-------lankabel----FBF-----lankabel------WRT54G--------wlan------WAP54G-------lankabel---------WRT54G

A: IP addresses configure to wrt54g

1. Work RESET! 15 seconds. the RESET button to rout in the switched on was entitled press.
2. remove at the computer all lan for cables.
3. WRT with computer connect by one of the 4 LAN of haven!
4. system control of the computer on classical opinion!
5. network connections click
6. rechtsklich on lan connection and status select.
7. in 2 riders the ipadresse of the gateway of kind of note. This is the routing address!
8. Routing address in firefox or to IE, only rout-vein-eats thus 192.168.x.x no HTTP or www enters before it!
9. now one should be in webconfigurationsmenue of the WRT. (Password: admin)
10. under LAN attitudes rout the IP address 192.168.178.X miss!
The X is important with all four devices here is eizigartig.
thus Fritz box has 192.168.178.1
and the WRTs has 192.168.178.2 and 192.168.178.3
11. DHCP server in both WRTs switch off! Otherwise there are substantial problems!
12. on save click.
13. WRT1 to the Hauswand nail and one the LAN of haven of the WRTs with one of the 3 LAN of haven of the Fritz box connect.
14. IP address of the WRT to wound in more browser taps and WLAN furnishes with WPA coding and channel the 3, SSID on “accespoint” sets

b: preparation of the wap54g

1. also again work RESETs! exactly as with the WRT! And computers with WAP connect!
2. computers on IP address 192.168.1.10 set.
3. IP wap ansurfen (192.168.1.245) and this the IP address 192.168.178.4
assign (save)
4. computers on IP address 192.168.178.10 set.
5. against by means of more browser connect themselves with wap (192.168.178.4)
6. into the wlansicherheitseinstellungen place wpa the password wrts at that
External wall.
7. under the WLAN attitudes one can change now the mode the WAPs.
we place now client the mode (save). Depending upon firmware version, is
now Butten named “Site a Survey” under the WLAN adjusting lungs or in
Status menu, whatever we click. Now a Popup opens windows
(Pobupblocker deactivate!) where everything in sews WLANs present eye-listed its
should.
8. We select naturally “accespoint” and connect ourselves with the WRT at the wall.
9. wap comes now to wound the holiday house and again by means of cables with one lanports of the 2 wrts one connects. after wlankonfiguration the 2 wrts (channel

then in the holiday house is should now everywhere wlan to ferfgung stand.

for problems simply again posts.

[Edit frank_m24: Several contributions in summary. One can also edit its contributions.]
Rear one and many dear thanks for your trouble and the really very good and detailed description. Small errors only in-crept, I tries it here to draw:

Cmodem--LAN--FB--LAN--WRT54G~~WLAN~~WAP54G--LanverteilerFerienhaus
|
---perLAN------WRT54G~~~WLanverteilerGarten

Does your description fit also for this?
Thank you and many greetings, adi_68

[Contribution 2:]
Completely fit the second WRT54G (WLanverteilerGarten) does not have to the FB with the design, naturally hangs.
Many greetings, adi_68

Quotation:

Cmodem--LAN--FB--LAN--WRT54G~~WLAN~~WAP54G--LanverteilerFerienhaus
|
---perLAN------WRT54G~~~WLanverteilerGarten

Since the Cablemodem only a IP address assigns can you only a NAT turns out attaches. Your FB. From there you can distribute with Lankabel you want main thing all devices are as many in the greichen subnetz.
The WAP must as client or client bridge to be configured, then you should be able to hang a normal SWITCH as distributors in the back to.

What is WLanverteilerGarten for equipment? If the WRT in the garden hangs, nevertheless does the Notebooks announce itself directly at the WRT or?