CO2 DSL vocationally - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Hello!

privet already use for approximately 2.5 years CO2 DSL, are also so far content.

Now I would like to make myself independent and rent for this an office.

There a new installation the telefonie is necessary. of me the connection of CO2 DSL is intended.

for the time being 1 telephone should be attached (probably rather isdn) and a scanner/a copier/a fax (probably similar), then later possibly. by 1-2 branches to be extended.

Now my question: since I will not be attainable repeatedly in the office, do customers mean however not so easily my portable radio number left want, exist the possibility (free/favorable) of a bypass of mine call in the office on my CO2 handy?

mfG

HP: which can be considered still perhaps for this: sip more provider order another call number with another, and of all this calls over the box to my hanydnummer - free???

Rear ones, in combination of the Family and Office Flat (free of CO2) and a AVM Fritz box you can get the whole relatively simply.

You can e.g. in the Fritz box do not register if you in the office are attainable, the box a RWL on your Handynummer make. The caller does not get thereby your call number to see.

sipgate purely and CO2 raus. FBF presupposed

[EDIT: Unreasonable full quotation of Pa-jt deleted. --gandalf.]

one can use CO2 also further to dispatch around faxes etc. (need at least. 2 lines) there possibly. later apprentice is adjusted, then also history with rwl will be void.

[EDIT: Unreasonable full quotation deleted by saber2003. --gandalf.]

then is one free rwl? thought the bypasses are always liable to pay the costs with CO2.

oh concerning. family & office flat: with DSL is flat to CO2 eh thereby; even a contract with did mobile flat, does speak uses oneself would have I only if my wife (over mine acc) CO2 an o or adds active 100 map, then she could call me in vain both in the office and on handy, or?

[EDIT: Contributions united, there temporally briefly successively. --gandalf.]

If you furnish a RWL in the Fritz, the attitude of the “Ausgagsnummer” may not stand on automatic. Because the BOX transmits the data here to the CO2 exchange technique, there then the RWL “is switched” and would be thus liable to pay the costs. If you select one of your four CO2 numbers there, it makes the Fritz and CO2 does not receive it. That make I already a time long in such a way.

[EDIT: Unreasonable full quotation of the contribution directly before it deleted. --gandalf.]

it should be rerouted however not on one of the four festnetznummern, but nevertheless on my more handynummer, folds that also?

However you must say to the box about which call number it your mobile phone to select are. Therefore you must use one of your four CO2 numbers; =)

P.S. Full quotations if one answers direct, are not gladly seen here; =)

Quotation:

Quotation of saber2003

However you must say to the box about which call number it your mobile phone to select are.

oh so…

Beautifully, it will then make for thanks in such a way.

has to be entbrandt the 7270 by CO2 then in addition?

concerning full quotations: likewise, it thanks me will notice!

As much I point has the CO2 Branding only which with the Tr069 to do (here CO2 can your box setting-up). Let me there however gladly improve; =)

saber2003 thanks!

here already for it looked, but a specification was not to be found unfortunately.

@RussianSat
the Schift key is in vain missing on your keyboard
I meant detailed discussions over Sipgate and outgoing over CO2 with RUL

@saber2003
concerning TR069 I am not so convinced, I assume those can substantially more thereby

@pa-jt: SHIFT - I know

thus I also presented it to me: a call number with SIPgate or so for all detailed calls. CO2 for outgoing. a problem places itself thereby: the customers will see another call number with recalls than those, which is indicated on the visiting card (homepage etc.). Find it not particularly beautiful.

how does one adjust RUL's?

1. with me are suppressed all CO2 call number, no customer still weighted.
On Vistenkarte and on the homepage Sipgatenummer are drauf, with offerer change manufacture also fewer problems, there no Portierung.
2. Are configured to RUL's in FBF

How does it look sipgate with the discussion quality, with? How highly are the costs sipgate with?

Quality

is good. For eingehenede discussions I pay nothing, am passed on over CO2 and/or. Betamax/Rynga

I meant rather the monthly fixed costs (basic charges or so) -

Hello RussianSat

starting from the plus package is inclusiv and also family & office CO2 an net-internal Flat.

There means you can from your CO2 firm connection also discussions on your private CO2 mobile phone free of charge pass on.

Concerning the outgoing connection, this should stand not on automatic.
For safety's sake should be deactivated under network also offerer services.

http://www.ip-phone-forum.de/showthread.php?t=196488

Greeting Resool

@ Resool: Thanks!!!

Are the receipt and dispatching faxes problem-free possible? Do I have to consider thereby something?

Can one use the 7270 as fax memory no external fax equipment was so long purchased? (Faxes are stored first to the FB and called up then at the PC?)

One can store Ankomende of faxes on a USB stick and/or send to an email address for each fax number, (the answering set files also).

Hello RussianSat

unfortunately I do not have handy forum left, but with the fax dispatch there are problems (DTMF not correctly conveyed) with Internettelefonie occasionally also

I have however no personal experience with faxes and the problem.

Greeting Resool

Thus in connection of a Fritz box with CO2 relatively problem-free runs. That was at the beginning still completely different.

Thus need times again assistance:
now the FB7270 of CO2 has has the CO2 call numbers.
Property still my Sipgate entrance data registered, only the call number of Sipgate is not then registered. already which with the Stun read attitudes, only where I adjust these? Such a menu is not visible!

MfG!

Hello

Extended attitudes
System
Opinion: Expert opinion activate

resool.com/help/help9.html

then an entry field for Stun should appear servers.

Greeting Resool

Or has rout to be before entbrandt?

VPI value with 2.PVC to 32 set or 2.PVC off completely switch

where I find 2. VPC, has no more attitude possibilities

Expert opinion naturally activate

Regisiriert!
I can be called, but the interlocutor does not hear me!!! Assistance!