Custom Search
VoIP General
VoIP News
VoIP Provider
VoIP Hardware
VoIP Software
VoIP Technology
Havn't found what you want?? TRY GOOGLE SEARCH:
VoIP News
VoIP Provider
VoIP Hardware
VoIP Software
VoIP Technology
Havn't found what you want?? TRY GOOGLE SEARCH:
Custom Search
CO2 Internet Telefonie with 1&1-FritzBox 71412010-11-24 | |||
|
Nextiva is a cloud based VoIP phone system, hosting lots of small and medium sized businesses nationwide. the provides UNLIMITED business calling for only $19.95 a month!! Click here for the detail about this promotion!!
Rear people,
are straight something at despairing… Degree does not try the Internettelefonie in addition-gets… functioned however… I have a 1&1-FritzBox 7141 (UI) Under extended attitudes I the following entered: Internet call number: 49xxxxxxxxxxx (x stands for my telephone numbers *g*) User name: RETCSxxxxxxxx@sip.o2online.de (x stands for number, which gave me CO2) Password: xxxx (have I received by CO2 for Internettelefonie) Registrar: sip.o2online.de (To input mask of the Fritz box see appendix) In the starting menu one indicates to the Fritz box: “Call number 49xxxxxxxx, no Internet connection” what wrong did I make? Thanks already once for your assistance!!! Hello, completely simply: you must use the checkmark with “Internet call number for the registration” to set! HP: Welcomely in the forum! 
thanks for your answer! the hckchen I made. functioned however not yet… I get a free character, it one selects and after that select to beep successively 2x of three different tones and then comes the busy signal character… 
Oh I see straight, you to RECTS *** @sip.o2online.de registered, it must however read: User name RECTS ******* Password ******** Password confirmation *********** Registrar sip.o2online.de Pro XY server NOTHING!!!!! You look here... thanks! on Sunday come I again into my dwelling, then I will try it out. functioned not yet To attitudes see appendix. Error message with the Telefonieanmeldung: “PPP registration with the Internet Telefonieanbieter failed.” The connection of the Fritz box runs already completely normally over the fragment, or? Because I to test purposes de-energising the CO2 DSL CO2-DSL-classical period-rout right after angschlossen have and this is angestpselt directly to the Tel box and not over the fragment runs. Quotation:
The attitudes see being correct. You can still type times around the typing errors exclude, mostly help for safety's sake everything already made…. again with CO2 will tomorrow call and me the data again give will let hhhmmm, which you want with the fragment? It only attached to the TAE box with the grey UFO cable to DSL of the box… I had before 1+1 and there had I the fragment to interpose. I took now the cable of CO2 DSL routing classical period, into the Tel box put and the other end into the DSL connection of the Fritz box put. -> Internet functions; but Telefonie does not function….aaaahhhh The wiring fits now, or? Quotation:
The box has probably UI-Branding, perhaps disturbs those, I hab' my equivalent entbrandet on “avm” that could be… how I know the Branding my FRITZ! Box hair dryer WLAN 7141 (UI) remove and on avm break? the search function in the forum functions here still. It goes with pseudo image “_als_avm” or over telnet thanks! since I nen mac without winxp environment have, is not applicable ruKernelTool. does it still different possibilities my Fritz box give to entbranden? Install for you a virtual machine on the Mac, on which you then run lets XP! with pseudo image or over telnet goes without Vienna XP certainly also, at least with Linux. Or doesn't your Mac have Internetbrowser or Telnetclient? 
hello! my Fritz box entbrandet as follows now: #96*7* called the following COMMANDs given: telnet 192.168.178.1 echo firmware_version avm >> /proc/sys/urlader/environment reboot must have functioned, or? but do not telephone that functioned yet…. what can I still make? put back in factory settings? can none help me more? if you zurckgezetzt on factory settings and all data of hand goes again registered/furnished and nevertheless not, then are your dates of registration incorrect -> inquire with CO2 times degrees back to factory settings put. what actually here do I have to select? now funktionierts! factory settings re-established and functioned; but only with @sip.o2online.de behind user name. have now still another problem: how get I this message away? if disturbs in such a way -> recovery or with pseudo image the function is not limited by the message, or? No, care you not drum… ok, thanks! can one load firmware updates despite the message, from the Fritz box interface? Jaha, more sischer dat! 
|
