CO2 P2602HWN as WDS basis station with FB3030 Repeater???

Nextiva is a cloud based VoIP phone system, hosting lots of small and medium sized businesses nationwide. the provides UNLIMITED business calling for only $19.95 a month!! Click here for the detail about this promotion!!

Hello of people,

I hope here can me someone continue to help. For which I the different Threads quite intensively here through looks for has and nix found now more again from me.

I have CO2 DSL Surf & Phone a box at the CO2 DSL VoIP connection, with the current firmware V3.40 (AOF.5) D0 | 19.03.2009. That is probably the Zyxel P-2602HWN. I want to operate the thing as basis station. Since the WLAN range is sufficient however not completely, I would like to extend the WLAN cover by means of Repeater. In addition has I mean old Fritz box 3030 unpacked, the newest firmware 21.04.34 up-played and now tries the FB as Repeater with the Zyxel as basis to operate. In the FB 3030 I do not see also the Zyxel however in the Zyxel get I the FB as WLAN equipment indicated. A BenutzerHB for the Zyxel, going beyond the Kurzanleitung, I do not have anywhere found…

Now my question to the experts here:
Does the Setup intended by me go at all?
Does the Zyxel P-2602HWN work over haubt in a WDS with the FB3030 together???

If:
How around everything in the world do I have to configure in addition the Zyxel of CO2???
If it over the Web surface not GET, because CO2 has too much weggebranded, then evenly over a direct left?

Unfortunately I cannot exchange the CO2 equipment… I am thus dependent on this Setup

Already times best thanks!
WegaWega

---

Which WLAN coding uses you? I assume times that the two in the WDS mode only with incoming inspection coding co-operate.

---

It is doubtfuly that the CO2 box WDS can. But there is also no menu option.

---

Hello together,

sorry, which I announce myself only now… was a few days on the way.

At present I use WPA2….
Thanks for the tip with incoming inspection, which I have naturally immediately tried out… unfortunately ohen success!

I unfortunately fear that the CO2 box and the Fritz box “do not want” with one another…
Indeed no menu option etc.

I thought only that possibly. someone knows, like one that possibly. also “without” official menu option via ssh or so, directly
to the CO2 box “teach” could.

Sun still who an idea, which I could try out???

Thank you!


-------------------
WegaWega

---

How do you want to teach to a crate somewhat, which cannot do those at all?
In addition WDS would have to be supported by the firmware.

---

mmmm…. tja… that is exactly the problem. Exactly I had that feared… I had however evenly hoped for that possibly. here in the forum someone a “trick” knows, as one “teaches” to the CO2 of thing evenly some more more could.

That possibly where into the deep system something is hidden, which would make it possible….

But, thanks to the assistance!

Greetings
WegaWega

---

BTW - you ask anyway in the wrong Sub forum
Look times please under CO2 DSL. There it concerns this routing sprag!