O2DSL with Fritz 7050 and remote connection - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Hello together,

I now already tinker the whole afternoon at my Fritz box and the UFO rum and come on no green branch.

The registration in the CO2 DSL already does not function. The data:

User name: o2@dsl.o2online.de
Password: freeway

do not fold in such a way. Can it be it to it is appropriate that for CO2 only with remote connection here is available?
From the UFO I have the user name:

xxxxxx@dsl.o2online.de (xxxxx= supposed privately)

over the ROM-T file selected. However no passwords do not fit, in the ROM-T stand only for asterisks and the passwords from the source text fit also.

Minutes the Fritz announce literally “you come here rivet purely!”.

I think I need the password, where I can the Hotline it select, or can I thereafter ask?

Greeting
Mac

Hello,

you had not found the guidances above? Les times…

And with the UFO the side source text of the Frames look at, without CSS.

In the Wiki it stands still compress and more clearly. References O2dsl and Fritz box (which otherwise

Left do not set folds somehow

Here the left is in Wiki!

Hello meckermac,
did you get ahead?
I have the same problem. Also remote connection. With CO2 the entrance data do not say to me.
Could you select it and if, how?

The people of CO2 swear stone and leg that my UFO also
User name: o2@dsl.o2online.de
Password: freeway
used.
With the FBF 7170 I get however:

23.12.09 21:26: 16 Internet connection successfully one manufactured. IP address: 192.168.1.35, DNS Server: 192.168.1.1 and 195.71.47.26, Gateway: 192.168.1.1

23.12.09 21:24: Does not answer 07 DSL (no DSL synchronization).

23.12.09 21:23: 24 Internet connection one separated.

23.12.09 21:23: 24 registration with the Internet offerer failed. BSA-ON

23.12.09 21:23: 24 Internet connection one separated.

23.12.09 21:22: 13 Internet connection one separated.

23.12.09 21:22: 13 registration with the Internet offerer failed. You come here rivet purely! 2 : -

23.12.09 21:22: 13 Internet connection one separated.

23.12.09 21:21: 05 Internet connection one separated.

23.12.09 21:21: 05 registration with the Internet offerer failed. You come here rivet purely! 2 : -

23.12.09 21:21: 05 Internet connection one separated.

23.12.09 21:20: 28 Internet connection one separated.

23.12.09 21:20: 28 registration with the Internet offerer failed. 0012 PSKLN001 0120424125 test user

23.12.09 21:20: 28 Internet connection one separated.

23.12.09 21:19: 28 Internet connection one separated.

23.12.09 21:19: 28 registration with the Internet offerer failed. 0012 PSKLN001 0120417851 test user

23.12.09 21:19: 28 Internet connection one separated.

23.12.09 21:19: 24 DSL is available (DSL synchronization exists with 3456/448 kbit/s).

23.12.09 21:19: Begins 14 DSL synchronization (training).

23.12.09 21:19: Begins 08 DSL synchronization (training).

It is remarkable that the user name for the Voiptelefonie according to selected UFO

RETCS12345678@sip.o2online.de

is.
In the example text was no @sip.o2online.de

Now I have the FBF behind the UFO and save a straight number with FBF fixed net over analog1 of the UFO's

Who can do me one taps gives, how I can in-select myself with the FBF?

Very strangely - looks also not after a WAN-IP, but like a local???????????? Are you to be fed surely the DSL line into de FB?
Quotation:

Quotation of groschi2

23.12.09 21:26: 16 Internet connection successfully one manufactured. IP address: 192.168.1.35, DNS Server: 192.168.1.1 and 195.71.47.26, Gateway: 192.168.1.1

So it would have to look:
23.12.09 01:41: 56 Internet connection successfully one manufactured. IP address: 77.0.155.166, DNS Server: 62.53.236.5 and 193.189.244.205, Gateway: 213.20.56.9, broadband PoP: rdsl-frnk-de02

Reference to double registration:
Quotation:

23.12.09 21:21: 05 registration with the Internet offerer failed. You come here rivet purely! 2 : -

PPPoE passthrough or other options, the double registration release deactivate.

I can pick the entrance data out in the source text of the Frames and in the file “Rome t”. strangely enough the user data differ in both methods. I estimate the user name in “Rome t” am the correct one. Stupid way is not indicated here the password. I need thus a possibility the password from the UFO to select.
With the fixed mains connection of the FB is a good idea, then I could use at least CO2 a number for the Handyumleitung.

The entrance data are with all:
User name: o2@dsl.o2online.de
Password: freeway

deposits somewhere? I find it nirgens in my UFO. Where do those have to stand? So one could tighten whether the “normal” and remoteconnection the data from each other to differ.

Greeting and glad celebration
meckermac

@voip-seufz: Apology, I copied a line too much, because the first line is my Notlsung with FBF behind UFO, therefore the local IP.
As the first mostly comes:
23.12.09 21:23: 24 registration with the Internet offerer failed. BSA-ON
Then mostly comes:
23.12.09 21:20: 28 registration with the Internet offerer failed. 0012 PSKLN001 0120424125 test user
and last:
23.12.09 21:21: 05 registration with the Internet offerer failed. You come here rivet purely! 2 : -
PPPoE passthrough I deactivated naturally and was also never activated.
“Could be other options” what?

One must parallel:
“further connection for the Internettelefonie over DSL use (PVC)”
absolutely fill out and use, that has I not.
Hatt somehow I so understood that one can only use, if all VOIP entries are with a Provider. I have however still sipgate and beta max of connections.

@meckermac:
so far I the menu do not grasp believe I that one can pick the DSL dates of registration out. They would have to be deposited in a visible menu, the menu for those the a choice data in DSL are however completely faded out. The types of the Hotline were also completely sure itself that we have also the same entrance data. Some from the support team also and use FBFs and there are turned on go with those also.

The solution with the fixed mains connection of the FBF is first times OK ONE, then I can use my office telephone now parallel with the mobile phone and the Weiterschaltung of my mobile phone on any connection functioned, practically also here: the calling sees in each case my Sipgate office number, even if I at all am not in the office.
Only my wife looks into the tube a second parallel connection cannot I not adjust however thereby can I live.

Greeting and glad celebration
meckermac

Today I telephoned again with the CO2 Hotline. First one was there very little helpful. Then it was granted that at the Bitstream customers possibly. but other entrance data are necessary.
Is there a possibility the entrance data of the UFO for DSL to pick out not nevertheless?

Hello to all,
straight I cracked the DSL registration for turned on CO2 customers.
I found an important note here:
http://www.zyxelforum.de/o2-zyxel-wl...tzen-t137.html
one can with:
http://192.168.1.1/WAN.html
access the side with the DSL entrance data, faded out in the menu.
Thus one has then already the announcing name, which consists pin of the first 6 indications + the usual “@dsl.o2online.de”.
Now it still concerns the password.
freeway it is not and the password for PVC is it also not.
Then I came on the idea the remaining indications the pin to take and see there, that am it.
Thus for all turned on CO2 DSL users the following entrance data apply:

User name: <Character 1 - 6 pin> @ of the " @dsl.o2online.de
Password: <Character 7 to 15 pin>

I will directly times try that…

Glad Christmas

Quotation:

Quotation of meckermac

I will directly times try that…

Glad Christmas

So, the source text of
http://192.168.1.1/WAN.html
the solution was, there stands user name (same as in “ROM-T”) and the password. That type was worth gold, Fritz box in the net and VoIP was completely for CO2 and Sipgate furnished immediately in 20 min. Adjusted and, all super tries all parallel calls out.

groschi2

!!

and now I diminish the UFO!

Rear one,
my first Posting here and equal not so completely in the correct column, however here 2 user a DSL connection with remote connection has CO2.

At you 2:
So far I do not have unfortunately only a 1000er line of the Telekom, more go lt Telekom and 1und1 also.
Now CO2 offers a line up to 7300 to me by BSA. How does it look with you, the data before approximately with the current achievement tuned?

yes, the speed is correct already, however also before already 8000 was possible with me.

Greeting
meckermac

No. Naturally not.
If one is a genuine customer with this DSL Providern, one is switched in the switching center directly to a DSLAM of the Providers. Since the Provider has differently high safety requirements, one gets entrances those there is substantially higher often than those, which would switch the Telekom, and/or. one gets there at all one. Like that it is with my brother, who gets from the Telekom no DSL, since it does not give the line angebllich. With vodafone (arcor it has 1000 now already since years DSL. It has however also problems and gets the 1000 also only with few select modems)
If one is only turned on, the whole runs over a DSLAM of the Telekom, so that also decides which the customer gets. Now it also in such a way that the more lines with high data rates is in a cable are operated, the more strongly disturbs itself it mutually, which leads finally to that can be done sometime nothing at all more. The Telekom switches therefore would often only less than actually go, since it can serve then also still further customers.
Those naturally now a devil to do and calculated the customer of the competitor better data rates to switch as their own customer.
With me the interconnect capacitance for 8000 is enough. CO2 promised 6000 to me and got I the same 3000, which I had also before with another Resaler over the Telekom.