Problem with 2. PVC and Fritz 7270 - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Hello,

yesterday my CO2 DSL with Fritz box 7270 was de-energised. And I have a problem for 2.PVC.

With the automatic Kofiguration 7270 builds the 2.PVC for the four CO2 telephone numbers. But if I entered another VoIP account (sip.voipbusterpro.com), with error “the receiving station did not announce 7270 answered”. After the disconnection of the 2.PVCs sip.voipbusterpro.com functioned again.

I assume that CO2 blocked all other SIP connections in 2.PVC.

My question is: can one select the suitable DSL connection for each Internettelfonie in Fritz box, so that the four CO2 number use the 2.PVC, and which other VOIP account the highway circuit use?

MfG

You do not need for VoIP compellingly the 2. PVC. Can it thus confidently deactivate.

Thanks for the fast answer.

I have since long always without 2.PVC to telephone. I would like to try now only times to use all services of CO2

Quotation:

Quotation of moudy

And I have a problem for 2.PVC.

2.PVC: VCI value to 32 set. Then geht's with other VoIP offerers also

Thanks! Your attitude is with me functions.

I have your attitude with my previous values to compare. The VCI are nevertheless alike. But the SIP and RTP characteristic differ. With me were SIP=30, and RTP=42.

After the adjustment all five successfully announced number.

That is genuinly mad. Thanks!

Please it notes that for the 2.PVC (1/35) other quality attitudes can be present in the CO2 net than for for PVC the 1/32. These guarantee that also with large Downloads your VoIP functions still error free.

Even if you lead now Voice traffic across 1/32, this function is no longer given and your Voice quality can suffer from it noticeably - this is then however not the debt of CO2.

Quotation:

Quotation of batmak

that also with large Downloads your VoIP still error free functioned and your Voice quality can suffer from it noticeably

I cannot do this betstigen. Even during full extent of utilization in down and Upload direction hat's always super functions, even with several simultaneous discussions. In addition FBF has Traffic Shaping and prioritization, where VoIP Telefonie stands on place 1. About bad CO2 quality none weighted nevertheless, completely on the contrary

And if there should be problems with 2.PVC, which one can always switch off

That sounds itself well. It considers however that the Fritz box can affect only the Shaping in transmission direction and no influence on possibly. Prioritizations in the o2-Backbone has.
Should (should!!) times to quality losses come, try _vor_ a call with CO2 in any case original attitude out (VoIP over 1/35).
Greetings.

2.PVC was I into events saw switched off that a DSL connection (Telefonie) with its own IP was nevertheless made. This was with L.G. 73.04.80. In the register map Internet was located on automatic.
Tr069 was switched off, even as server address I 127.0.0.1 registered. All VoIP number was registered, was surprised I irgenwie. Spinnt my FBF or is really developed the 2.PVC by alone?

Now with 73.04.76 does not happen sowas