article.voiper.org

Custom Search
VoIPer Article>>>VoIP Technology>>UFO only as modem and VoIP adapter use?

Custom Search

UFO only as modem and VoIP adapter use?


2010-11-24
 
Nextiva is a cloud based VoIP phone system, hosting lots of small and medium sized businesses nationwide. the provides UNLIMITED business calling for only $19.95 a month!! Click here for the detail about this promotion!!

Hello,

for some look for has I already so far the information found that
there an option is PPPoE Passtrough in the UFO to activate over those
Konfigseite:

http://192.168.1.1/WAN_Adv.html

Unfortunately one does not know then the existing WAN connection
terminate directly around itself with a downstream rout via
PPPoE to in-select, a restart of the Ufos has the effect that immediately
again the Konfig is put back.

Somehow the possibility exists the UFO only as DSL modem and
To use VoIP adapter?

I will gladly my Lancom rout far to use that has however unfortunately
no ADSL modem inserted.

There does someone have ne idea or experiences? Thanks.

Ahoi
The other one rout (Lancom) can the existing DSL connection share, or?
Which I want to avoid the Lancom rout behind the UFO rout, which would have
also little sense 2x NATen and the advantages Firewall etc. the Lancom come
so also not to, from therefore is no option carries.

I was QSC customer and those before have in principle a modem had behind
which I had attached the Lancom and these with that a choice data
the PPPoE connection had constructed.

The QSC modem was also in principle routs on that the Routingfunktion
was switched off.
DHCP servers and Firewall can be switched off in the UFO. In principle it is the same if a FBF behind UFO runs
No is it not. Since the PPPoE connection is developed further by the UFO,
the UFO then the connection via LAN passes on to second routs and
that is complete nonsense there I then further all WAN relative Eintellungen
in the UFO to make must and that is not not like that be.

There is the attitude in the UFO PPPoE Passtrough thereby is the routing function
switched off however after a restart the UFO configures itself again back.
thus today is to be shifted me succeeded the UFO in the Bridgemodus. After a restart it remains also there and PPoE Weiteleitung also. 2PVC runs and CO2 call number is announced. The whole has over http://U.F.O.IP/WAN.html folded
Quotation:
Quotation of hazweioo Contribution indicate ... those have in principle a modem had behind
which I had attached the Lancom and these with that a choice data
the PPPoE connection had constructed.
That can be done with many ADSL2+-Modems or routing problem-free. At CO2 DSL the Arcor Easyboxen (A40x) is very good as modem or the old AOL phon box. In each case for 1. -€ to get +Porto in the bay.
Saves time and nerves and if there which is broken, then can one still the UFO as spare equipment use.
Quotation:
Quotation of hazweioo Contribution indicate
Unfortunately one does not know then the existing WAN connection
terminate directly
is not necessary also
Quotation:
Quotation of hazweioo Contribution indicate a restart of the Ufos has the effect that immediately
again the Konfig is put back.
is not correct, straight made - all attitudes beige-remained (PPPoE forwarding, SIP-O2 and Sipgate)
Quotation:
Quotation of Pa-jt Contribution indicate is not necessary also

is not correct, straight made - all attitudes beige-remained (PPPoE forwarding, SIP-O2 and Sipgate)
has the same effect as I yesterday, which makes UFO which it wants.
few times on brigde place, sometime goes it.
article.voiper.org
   Copyright@2010   Sitemap