CO2 <> Asterisk - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Moin,

make straight my first steps and things VOIP and Asterisk and on my Debian root server with Server4You the 1,4 Asterisk installed and already configured little.

Since I have at home a 16.000er line with VOIP von O2, my idea was to be taken number also being available of the MSN's and abused for Asterisk.

After registering in sip.conf the message dipped with Asterisk: “xxxxxx@sip.o2online.de timed out, trying again” up, which led me to two questions:

1. It is to be used at all generally possible CO2 a SIP account, without going over the CO2 DSL connection.

2. Since CO2 manufactures the relationship with the telephone number over an account number, I am not completely safe of the SIP URL me over the syntax. I tried the following combinations out unsuccessfully:

register => Account number: RETxxxxxxx: passwort@ sip.o2online.de/o2-g
register => telephone number: password: RETxxxxxx@ sip.o2online.de/o2-g
register => account number: password: RETxxxxxx@ sip.o2online.de/o2-g
register => account number: passwort@ sip.o2online.de/o2-g

Would be mad, if someone could help me there on the jumps.

Greeting
Ronny

CO2 sip accounts are usable only within the CO2 of net.

that will not fold unfortunately, since call numbers are bound the CO2 to the CO2 net (or also directly to your connection). therefore you cannot use the numbers on yours debian servers.

Sch….

But first times thank you for your answers.

Is stupidly… Well well, then I times to test purposes another account will procure myself.

Quotation:

Quotation of saber2003

that will not fold unfortunately, since call numbers are bound the CO2 to the CO2 net (or also directly to your connection).

If then sip the accounts and not the “call numbers”.
With CallWeaver behind the o2router goes (STUN support).

stunserver_host=stun.sipgate.net
stunserver_port=10000

However a considerable act, whose amusing Splitsystem wants to know their MCCS dispatcher with PBXen to marry, and from T.38 nix, makes no INVITE for more switchover for T.38 and with T38CALL=1 direct:
Quotation:

SIP/2.0 415 Unsupported Media type
November 22 16:16: 06 BOSE [3059506064] logger.c: -- Got SIP response 415 “Unsupported Media type” bake from 217.188.32.4

Thus who wants to operate PBXe, rather nen other Provider takes

Newest attempts:
http://www.ip-phone-forum.de/showpos...5&postcount=50

I have in the meantime rausbekommen why detailed discussions from CallWeaver to seconds are broken off, the CO2 SWITCH acknowledged that OK ONE with the call assume after RINGING not with ACK therefore CW presents,

can that confirm someone for * and others clients?

UPDATE:
The CO2 SWITCH sends the ACK however to the haven in contact the day instead of at 5060
Code:

xxxxxxxxx.sip  > rmws-mnch-de09-gigaet-0-3-235.nw.mediaways.net .sip: SIP, length: 808
	SIP/2.0 100 Trying
…
	Contact: <sip: 49xxxxxx@xxxxxxxxxxx:10004>


195.71.106.68 .sip  > xxxxxxxxx.10004: SIP, length: 668
	ACK sip: 49xxxxxxxxx@xxxxxxxxx:10004 SIP/2.0

And there CW does not hear.

UPDATE:
With nat=no ' s goes sees now, times as long.

UPDATE:
And again not:
Code:

May 5 14:51: 21 WARNING [3051584400] chan_sip.c: Maximum of retries exceeded on transmission 02745ad02575f54e0d50f9a35cf30e76@ 195.71.106.85 for seqno 2 (Critical Response) SIP timer T1: 34
 May 5 14:51: 21 WARNING [3051584400] chan_sip.c: Hanging UP call 02745ad02575f54e0d50f9a35cf30e76@ 195.71.106.85 - NO reply tons our critical pack.