Calltrough of problems - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Rear _Zusammen,

I have Fritz box 7270 firmware *.80 and my Provider am CO2.

Calltrough functions in principle with me, but with the number which can be called numbers are doubled or forgotten?!?

Orginale number would be 07x23046258!!!
26.03.10 10:33: 51 Internettelefonie with 7x233046258 over sip.o2online.de was not successful. A cause: User emergency found (404)
26.03.10 10:32: 25 Internettelefonie with 7x23046258 over sip.o2online.de was not successful. A cause: User emergency found (404)

Orginale number would be 07x1918536!!!
26.03.10 08:42: 27 Internettelefonie with 07x19185366 over sip.o2online.de was not successful. A cause: User emergency found (404)
26.03.10 08:36: 57 Internettelefonie with 07x11918536 over sip.o2online.de was not successful. A cause: User emergency found (404)
26.03.10 07:34: 49 Internettelefonie with 7x1918536 over sip.o2online.de was not successful. A cause: User emergency found (404)

Has there who already a solution? Thanks.

Hello derkleineups

use does you also for the detailed connection the CO2 connection?
If you call from a mobile phone with Festnetzflat, furnish to you another Sip offerer with fixed net number and try it over these.
(Resool is NO expert)
With the Voip Telefonie there are problems with the DTMF of which probably with the Callthrough is again and again used.
With Dus.net and Sbq4you.de I have the Fritz successfully over Callthrough! Box to reach know.

Greeting Resool

I call myself from the CO2 mobile phone on (free of charge) and want then through-connect to leave, with it I free of charge in the fixed net call can ^^

Hello derkleineups

uses you the Office & Family option with a O2o Sim map

or

you have a Sim map with a Festnetzflat

If Festnetzflat could you one the Voip mentioned offerer try.

another alternative would be a GSM gateway with one the O & F Sim maps those free of charge with one another to telephone can

Greeting Resool

Jo - would be idea with gateway - however does not go simply with Fritz box. I do not want to have any more devices at the net - rather less ^^

Solution?!?
Property of only 2 similar telephones to the 7270 and then seems to fold the direct-inward dialing.
(Before I had still 1 x Fritz mini as 3. Telephone to. )

Parallel a further discussion runs to the same topic here in the forum. Look at you times: http://www.ip-phone-forum.de/showthread.php?t=208544

The temporary solution would be to be used the directory of the Fritz box. There each entry gets an abbreviated dialing of the form ** 7XX.

Then one can select the Fritz box - callthrough +0 for free characters enters password and then the abbreviated dialing number.

The abbreviated dialing best in such a way put on that no doublings could disturb. Thus if you too e.g. the abbreviated dialing ** 725 uses, then the number 2 could be doubled, and be selected by it ** to 722 (5). Therefore ** 711, ** 722, ** 733 etc. omit.

Quotation:

Solution?!?
Property of only 2 similar telephones to the 7270 and then seems to fold the direct-inward dialing.
(Before I had still 1 x Fritz mini as 3. Telephone to. )

Thus after detailed attempts I come as described above completely well clear with the Callthrough.
(FRITZ! Box hair dryer WLAN 7270 v3 Firmware design 74.04.80)
Mobile phone CO2 > Fritz box purely > Callthrough > Fixed net call
And the whole would be now free with the Family Flatrate

As soon as I have now a ISDN telephone, I will attach that at the S0 and will let you know whether it also still functions then.

That is totally amusing - today Callthrough functions only each to 2-3. times!!!

And here still Left - because I exactly the same was

Perhaps it was also because of the update on DSL laboratory version 74.04.80-16750