Does CO2 Voip with PBXes function? - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Hello together,

I consider myself to CO2 DSL to change, since I am also with my mobile phone with CO2.

Instead of realizing a Rufumleitung (on CO2 a portable radio number) of a Fritz box, I thought that I that possibly. also over PBXes to make could.

With Voip call numbers of 1&1 I already tested RUL, marvelously functioned.

However would be my question, as I can register o2-Voip-Accounts in PBXes, since with CO2 of the username for all assigned call numbers is identical (RETCS…) and CO2 thus obviously also still the call number during the registration needs (with a Fritz box a checkmark must use with “Internet call number for the registration” to be set).

Super, if someone to me could say, would be like with PBXes being configured can and/or. whether PBXes with CO2 call numbers functions!

Thank you in advance

Old Europe

does not go in my opinion, since one can use O2-VoIP only at CO2 DSL.
Therefore one cannot furnish O2-Voip also on WLAN mobile phones for on the way. But also I need further my Sipgate etc. in order to be able to call from the USA free of charge at home.

Quotation:

Quotation of VoIP sigh

does not go in my opinion, since one can use O2-VoIP only at CO2 DSL.

Does that mean that CO2 VOIP only with CO2 a IP functioned (sorry, but I work myself straight only into the topic “CO2 DSL”…)?

Thanks and greeting

Old Europe

Yes, so isses

I can confirm

Everything clearly, thanks for the answers!

I ordered and become now nevertheless times CO2 DSL the RUL over my FB 7270 realized. Are already strained on the quality - however owing to student contract I could after 3 months the contract.

Thanks and greeting

Old Europe

one comes also within the first monthly raus if one would like… reads times the small print

Hello together,

in the meantime my connection is switched and functioned marvelous with CO2, so that I would like to change also with a further connection from 1&1 to CO2.

Therefore still another question to CO2 Voip and CO2 IP addresses:

If someone can say to me whether CO2 Voip only with the IP address of the pertinent connection functioned or whether one could use the call numbers also at another connection - so long it also around CO2 a DSL connection acts (after both connections under a customer number, should also no problem will run regarding abusive use etc. exist)?

Thanks and greeting

Old Europe

Quotation:

Quotation of Old Europe

Someone can say to me whether CO2 Voip functions in each case with the IP address of the pertinent connection

Exactly the same is it. I could not try it yet in the surrounding field of the own HVT, in addition, because of the uniform internet PW with unterschiedl. Voice mechanism is to be assumed that.

Quotation:

Quotation of Old Europe

or whether one could use the call numbers also at another connection

The other connection should be switched from the CO2, then geht's

Did you try? Forwards approx. one year tested - did not go.

Quotation:

Quotation of Pa-jt

The other connection should be switched from the CO2, then geht's

Thanks!

Greeting, old Europe

Quotation:

Quotation of ilvoip

Did you try?

Yes, even a call number with two different CO2 of connections registers at the same time.
, Only a meaningful application for it did not go hab' I found

You are right - that is however new. Today I could use the O2voice-Nummern of a Arcor connection

with 1und1 connection and GMX with and without 2.PVC have I no success.

Gibt's there which special with identification/password?

PBXes does not go. Asterisk does not go thus also. OK ONE.
It goes only from a O2-IP - which have I understood. Which I did not understand, it is whether this O2-IP must be from second PVC, or whether the IP also of first PVC may be. Or differently in demand: Does o2-voip with switched off second PVC go?

Yes, goes
9 10