Fritz box 7113 at fragments

Nextiva is a cloud based VoIP phone system, hosting lots of small and medium sized businesses nationwide. the provides UNLIMITED business calling for only $19.95 a month!! Click here for the detail about this promotion!!

Hello together,
an acquaintance had so far his Internet connection with Alice and is now to CO2 changed.
So far its Fritz box 7113 was attached over a fragment. Now the DSL entrance and concomitantly the Telefonie does not function, naturally with the new entrance data any longer.
Me can someone do one taps gives, how the FB is to be attached, so that the DSL signal arrives?
Thanks for Tipps and greeting

Michael

---

In principle the box with the past wiring must to be continued using be able. If CO2 is a pure DSL connection, then the branch of telephone behind the fragment is no longer necessary, it makes however nothing, if it remains further connected.

---

What was made, when the change was accomplished? Only were the new entrance data entered or made some more?

---

Only the entrance data were changed
Greeting
Michael

---

Then put times the FB back to factory settings, take thereafter once for 10 minutes all cables of the box. Subsequently, you enter the entrance data and all necessary other data by hand again.

Under any circumstances a safety device of old configuration data should not be brought in, since you repair otherwise the existing configuration garbage.

---

did you finalbreak the 7113?

no O2-Branding (attitudes) deposited the 7113 nevertheless, or?
if that like that is not, one must with fbeditor the etc. but some modify.
in the correct forum range you are, read times with importantly marked T. bsw. here