[Solved] CO2 VOIP externally use? - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

Hello together,

the following output basis:

1. Erstwohnsitz with CO2 DSL and VOIP Flat over CO2 UFO
2. Zweitwohnsitz with cable Internet (without telephone) inclusive FBF
3. Officially much with a WM-mobile phone of HTC on the way

Question:

1. Can I use the O2-VOIP-Account in the FBF of the cable connection?
2. Can I use the O2-VOIP-Account in the mobile phone over HSDPA?

Greeting
DefCon_Drei

Yes, everything goes. Property me in addition a 7270er directly of CO2 procures and uses for external sip registrar the FBF.

But at the CO2 connection I do not have FBF to separate the CO2 UFO.

Can one write the CO2 data “directly” into my cable Internet Fritz box?

It did not try. But according to different statements in the forum that cannot be done here, because one can operate o2-Voip only at a CO2 connection.

Quotation:

Quotation of PsychoMantis

o2-Voip only at a CO2 connection to operate can.

It looks in such a way, only with a bit Stream connection can it differently look

Thanks for your answers.

From where white I whether CO2 a Bitstream connection switched?

If I get myself 7270 for the CO2 entrance and these as external Registrar in my mobile phone and Kabelinternet-7270 uses, how I bind the O2-7270/with which data?
[EDIT] See http://www.avm.de/de/Service/FAQs/FA...eitere=weitere . Apparently “simply” as IP Phone add [EDIT]

The question was nevertheless
Quotation:

Question:

1. I know the O2-VOIP-Account in the FBF of Cable connection use?
2. I know the O2-VOIP-Account in the mobile phone over HSDPA use?

That does not have to do with FBF SIP Registrar

Why? It wants to use of external (thus of the cable connection or over UMTS). That cannot be done normally. Thus the way occurred to me over the 7270er (would have to go however with an old 7170er also, there also to the SIP Registrar in it has).

Back to the topic: I can remember, I had it times with a Congstar connection to do and there could I for VoIP also only over these a connection make (went from other IPs thus not). Then I had another server however somewhere rausgefunden (thus not the server, which was there normally adjusted for VoIP) and thus went then also from my Vserver. Perhaps it goes so similarly with CO2.

If I with my Fritz! Box over UMTS (CO2 and/or. T-D1) in Internet does not go going then is immediately all CO2 call number any longer registered, sipgate, rynga and to beta-max.
Thus a Smartfon over WLAN as SIP telephone to use does not go already, more however. Or does it want to try over VPN? I in the forum understood in such a way here that with bit Stream entrance additional passwords are communicated, perhaps then geht's.

Thus I had presented it in such a way completely concretely (straight runs in such a way, only with the difference that my Vserver to-hangs there to its FBF instead of cables or UMTS) with a Cousen: One arranges completely normally a 7270er for CO2. Then one deactivates second PVC. One closes still another telephone on (IP telephone). In voip.cfg one makes with reg_from_outside yes instead of No. And already you can to-hang another FBF to a 7270er configured in such a way, or a mobile phone over UMTS (there are guidances for it enough here in the forum) or evenly a Vserver etc.

Hmm of ok. Then I will not come around a FBF 7270 for my CO2 connection drumherrum. Best thanks for the answers - questions all solved.

Quotation:

Quotation of PsychoMantis

In voip.cfg one makes with reg_from_outside yes instead of No.

Thanks, this is not already times interesting, I nothing at all did not know. Country widely Callthrough is substantially more simply however from the foreign country over WLAN/LAN would already be it which.

Quotation:

Quotation of Pa-jt

from the foreign country over WLAN/LAN it would be already which.

Would not be. Is. I have my information out this and this Thread.
In this Thread probably stands, as one could solve the whole with a 7170er.

Is super. Without Asterisk.