problems with fax - VoIP General, VoIP News, VoIP Providers, VoIP hardware, VoIP software, VoIP Technology

to miracles a beautiful good evening wish I you….
I got so far my plant, now have I still another small problem, I can no faxes sendne and receive.
to my gertschaften again briefly: I have CO2 DSL with the white zyxel rout then come one eumex 504 PC SE as fax use I all into one turn out officejet for j4680 of hp.
to eumex I have over the connecting terminals in telephone fable angeschlossssen from the cellar in the 2. stick goes.

if I e.g. from one telephone those fax number calls, hears I a free character, more normally points would have nevertheless that fax clay/tone to listen to be typical or?

what wrong can I have made?
already I thank you you

Is your SHIFT key defective?

Please excuses! Stupid habit.

As wrongly attached or fax sounds itself switched off.

That was also your luck, because the answers would be remained without your SHIFT key very few…

Trick the braids over and test again, or attaches the fax directly to the UFO

The fax is attached, the braids has I also changed however without success. With UFO you mean the Zyxel nevertheless or? Can I do then the fax at all its own Tel number assigned if it to rout am attached?

Yes, it can be adjusted

Hello,

I say times I are beginner again here and.

I have my fax since February CO2 DSL and wanted today after removal and renovation entlich to again use.
HP J4580, but somehow does not fold nes no more.

I know receiving raus only go nix more.

Do not have this white modem of CO2 and have it in the plug for nPhone/fax eingestekt in the Nr1 in addition, on the number 2 cuts nes.

Have already this adappter out-per-offered with an answering set cables,

But nix raus, can with please someone goes somehow one taps gives or must I really the offerer wechechseln?

Love greeting and thanks

Tiara

Search function is certainly described to help, Saber2003 somewhere hat's

Hmmm… to info.:

If in the haven software the fax feature were not activated by CO2 during the mechanism, then that does not become anything with that faxes.

I had the play before 2 years also and after I had criticized with CO2, the haven was updated and it functioned.

Ergo, support trouble!

@tiara1875

As Doc456 already said, it cannot be into the Portconfig the fax feature switched is.

Alternatively look nevertheless times in your fax equipment after whether the error correction is switched off….

Greeting

I am not unfortunately yet further come…
however in the guidance of HP something from a DSL_Filter read.
Can that be the reason?
With CO2 well no fragment is used as with the T-Com.
With the questioning of a well-known search machine I am encountered two statements:

1.) http://www.lindy.de/dsl-filter-deuts...ion/75105.html
Which would bring?

2.) do I have read fragments all this alike am, if nevertheless the DSL filter is actually the same, or?

I have still another old fragment.
Thus which means it? Variant 1 or 2 or completely which other one?

Are strained on your advice
Best greetings

Some more to info.,
I have a fax test report accomplished with the following result:

Hardware test for fax >>> Successfully
Fax is connected with funtionierender telephone connection socket >>> Successfully
Telekonkabel is connected with krrektem connection at the fax >>> Successfully
Use of a correct Telefonkabels with the fax equipment >>> Successfully
Selecting toner identification >>> Error
Test for the condition of the fax line >>> Successfully

The fragment separates DSL and telephone line (frequency range). Since with CO2 only DSL is eingespeisst a fragment is not at all needed.

And how does it look with the DSL filter?
Helps me?

Quotation:

Quotation of o2basti

And how does it look with the DSL filter?
Helps me?

with CO2 DSL (and also different DSL offerer without fixed net) the part is useless

But wodran it can still lie?

Well then it can lie nevertheless only to the Eumex, or?